Screws
I would get some of the clear gorilla glue and a toothpick and a cotton swab.
The gorilla glue works with water. Use the cotton swab to wet the wood down in the hole as best as you can, then poke a little bit of glue into the hole with the toothpick, then put the screw back in. The glue swells as it cures. I’m betting the screw will stay in place.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|