|
02-22-2017, 02:22 PM
|
#1
|
Seasoned Camper
Join Date: Dec 2016
Location: Visalia
Posts: 68
M.O.C. #19277
|
LCI 6 point leveler
I finally got around to trying to level the Auto jack leveler today, as ever since we've had this unit (Aug of '16), it has tilted to the driverside/down, making it like you were walking downhill. Got out the instructions and went through the Zero Setting of the control sequence, except I never could get it to reply after giving the FRONT & REAR 10 pushes on each button. Oh crap, another defective module, as I had one on my older Wildcat. Looking at the Youtube video also, and I was doing the same thing as the paper instructions, so what can it be?? I walked away from it, thinking I would tackle it later, but later came sooner as just had to figure it out. So instead of pushing each button 10 times, I pushed them 12 , thinking maybe the computer cant count, and PRESTO it came alive!! Went through the leveling process in the MANUAL mode and saved the results and all is fine now...golf ball wont run down hill now... So if your computer cant count, or you are missing toes and fingers, just add 1 or 2 pushes and see what that does..
__________________
John & Connie (52 yrs sofar)
Bailey & Sally (mutts)
2008 Dodge Ram 3500 4x4 DRW
2016 Montana 3440RL Legacy-Andersen 3200 Hitch
|
|
|
02-22-2017, 07:36 PM
|
#2
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
I never did trust computers
|
|
|
02-22-2017, 08:59 PM
|
#3
|
Montana Fan
Join Date: May 2013
Location: Bartlett
Posts: 196
M.O.C. #13418
|
Magic number was 12 for me also. Go figure.
|
|
|
02-25-2017, 10:47 AM
|
#4
|
Montana Master
Join Date: Jul 2010
Location: Lake Havasu City AZ.
Posts: 1,811
M.O.C. #10552
|
Yep 11 for me???
|
|
|
02-25-2017, 10:58 AM
|
#5
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Good to know this .It has always been 10 for me but now I will know what to try if 10 does not work.
|
|
|
02-26-2017, 06:03 AM
|
#6
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Quote:
Originally Posted by richfaa
Good to know this .It has always been 10 for me but now I will know what to try if 10 does not work.
|
Same here, but I must admit that I have only had to recalibrate 1 time in 5 1/2 years of full time use.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
02-26-2017, 10:03 AM
|
#7
|
Montana Master
Join Date: Aug 2015
Location: SWFL
Posts: 964
M.O.C. #17801
|
Ten for me, too, but I'll try to keep it in mind.
|
|
|
02-26-2017, 03:35 PM
|
#8
|
Montana Fan
Join Date: Jan 2017
Location: Holly Springs
Posts: 159
M.O.C. #19394
|
Just calibrated my new unit. 10 worked. 11 and 12 did not.
__________________
2017 3950BR
|
|
|
02-27-2017, 10:00 AM
|
#9
|
Montana Fan
Join Date: Mar 2013
Location: miami
Posts: 152
M.O.C. #13290
|
10 worked great for me the camping world i took it to get the keypad replaced didn't how to do it and gave it to me without being level go figure
|
|
|
02-27-2017, 01:38 PM
|
#10
|
Montana Master
Join Date: May 2005
Location: Fall Creek
Posts: 1,329
M.O.C. #3699
|
The more we talk about the LCI level Up system on the new Montana's are we seeing a trend that the touchpad maybe a weak link in the system? Just a thought
__________________
Bob and Nancy Kassl Fall Creek, Wisconsin
2015 Montana 3440RL Legacy Edition, G614's, Pressure Pro TPMS, Dish Tailgaters
2016 GMC Sierra Denali 3500 CC SRW, Iridium Metallic, Duramax Allison Transmission
|
|
|
02-27-2017, 07:08 PM
|
#11
|
Montana Fan
Join Date: Nov 2010
Location: Terrell
Posts: 353
M.O.C. #10881
|
touch pad went out 10 months after install. LCI service tech was great helping on the phone manually lower and then raise/set up the next day. He sent out over night a replacement pad and then had me call for him to walk me thru the install. Because we were heading to Elkhart for the Fall Rally - he had us stop by the factory and had them check everything out.
|
|
|
02-28-2017, 04:50 PM
|
#12
|
Montana Fan
Join Date: Mar 2013
Location: miami
Posts: 152
M.O.C. #13290
|
kassl the problem after my second keypad went out was that the screws use for the keypad bracket the head of the screw is too big and the keypad it's self sit on those 4 screws instead of the bracket like it's suppose to, and with time you start to bend the board with every touch . after i replaced the screws with ones that fitted the whole on the bracket a miracle happen my keypad started working again and put passthrough screws with nuts because the factory screws with time start to come out
|
|
|
02-28-2017, 07:20 PM
|
#13
|
Montana Fan
Join Date: Dec 2015
Location: Nokomis
Posts: 464
M.O.C. #18144
|
knock on wood mine has been fine so far...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|