|
11-14-2017, 09:15 PM
|
#1
|
Montana Master
Join Date: Mar 2014
Location: Sioux Falls
Posts: 505
M.O.C. #14162
|
Hot Water Heater Issue
Need some feedback here. Our new rig (2018 3790) is having a problem. Since we picked up the rig new, I have been using both gas and electric on the heater. Did this on our 3900 for 4 years with out any problems. This afternoon, I was hearing a sound from the water heater, which stopped when I turned off the electric. I left it off for awhile, then noticed that the water was getting cooler. The gas side should have been keeping the water hot. Anyway, now I can see that the gas side isn't working, and from looking at the burner tube, I'm not sure it has ever been working. I turned off the gas swich, then turned it back on. The gas valve keeps opening, as it should, but the igniter isn't igniting. The DSI FLT light isn't coming on. I can't say that I have ever heard the water heater running on gas, but the unit sits on the ODS, opposed to my old rig which was on the DS, and you could hear it when you went out the door. The stove and furnace are working fine. I've got plenty of propane. Your thoughts/suggestions would be much appreciated.
__________________
Steve & Sheryl Engels
2018 Montana 3790RD
|
|
|
11-15-2017, 05:44 PM
|
#2
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,320
M.O.C. #17894
|
Take the tube out and blow it out with air. Sometimes spiders build nests/webs in them interfering with the gas flow.
|
|
|
11-16-2017, 07:43 AM
|
#3
|
Montana Master
Join Date: Mar 2014
Location: Sioux Falls
Posts: 505
M.O.C. #14162
|
Just a quick update. While the valve is opening and closing during start up, the igniter is doing nothing. I'm thinking I may buy a new igniter ($14) and put it in. I can feel the current in the wire getting to the igniter, but nothing after that. Hard to believe a new igniter would be bad, but..
__________________
Steve & Sheryl Engels
2018 Montana 3790RD
|
|
|
11-16-2017, 08:25 AM
|
#4
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
I would try an alignment on the spark rod first. Just bend it to reduce air gap. Also check that you have 12vdc on the gas valve and that it opens so that propane is there to light.
|
|
|
11-16-2017, 08:26 AM
|
#5
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,172
M.O.C. #6433
|
Manual says spark gap should be 1/8".
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
11-19-2017, 06:48 PM
|
#6
|
Montana Fan
Join Date: Dec 2015
Location: Sanford
Posts: 114
M.O.C. #18136
|
I always used my electric and one day decided to try the propane. Turned off the electric and started the propane and nothing. Did the same thing several more times on different days with the same result. When I got home from the seasonal site I mentioned this to my son. He tried the gas and it fired off the first time. We figured out that after using the electric and then switching to gas the temperature was high enough in the tank that the thermostat prevented the gas side from igniting. No problem since then.
|
|
|
11-19-2017, 07:08 PM
|
#7
|
Montana Fan
Join Date: Sep 2017
Location: ALAMEDA
Posts: 227
M.O.C. #20448
|
I had a problem running on propane disconnected the plug strip and sprayed with contact cleaner. Worked perfectly for the next 3 years. Was still working when we sold the old rig last month.
__________________
2017 Montana High Country 310RE
2017 Ram 2500 Diesel, 4 wd crew cab, slr, pulrite super glide, short bed, 2 ea 100 Ah LiFePO4 12 volt Deep Cycle Battery
|
|
|
11-19-2017, 07:22 PM
|
#8
|
Montana Fan
Join Date: May 2016
Location: Ishpeming
Posts: 214
M.O.C. #18650
|
Could the gas orifice be plugged? Had that happen on a previous rig. When I took apart I found pipe dope was plugging it up
|
|
|
11-20-2017, 04:49 AM
|
#9
|
Montana Master
Join Date: Mar 2013
Location: Hanover
Posts: 1,471
M.O.C. #13325
|
The igniter is a very simple piece of hardware and seldom goes bad unless the porcelain insulation cracks. What CAN go bad is the little electronic board that makes the spark itself. This isn't all that expensive, but can be a real PITA to replace because of where it's located. Your Monty is brand new so this should be covered by warranty.
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|