SLIDES NOT OPENING

[Bob & Lee]

I searched around and did'nt see any related topic.. yesterday I put my slides in and all was well, moved the RV to put more blocks under the wheels to level. Then ran the slides back out and the BR works good the Kit seamed to be ok the desk/TV seamed ok and the sofa slide ok. Then I checked them the BR good the Kit bottom out the top was loose about an inch or so, can push it and it moves the desk/TV same, the sofa out good and tight. I ran them in again and out and same thing, did it again and same thing. I never noticed this in the past.I checked the pump and all looked ok. Today I was goint to try closing the valves for the BR and the sofa slides and see if it makes a diferance mayneed more pressuere. any sugestions before we get rain or snow..yes snow.

Thanks
Bob

[racerjoe]

do you have enough power? if battery is low may not have enough to run the pump. it has to be fully charged to work properly

[JimF]

could also be low on hydraulic fluid, check that. Helped a guy in a new Montie last week that had low level, added ATF and it worked fine.