|
08-26-2011, 10:09 AM
|
#1
|
New Member
Join Date: Aug 2011
Location: waukesha
Posts: 3
M.O.C. #11714
|
hitch on back of 5th wheel
I have a 1999 2850 Montana 5th wheel. I want to pull my boat with it. Does anyone have suggestions as to installing a hitch?
|
|
|
08-26-2011, 11:47 AM
|
#2
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Dwad,
You might want to try the SEARCH feature. It is not a very efficient or consistent process but it might work for you. Probably worth a try since this has been a much discussed item here on the MOC. Good luck, Dennis.
|
|
|
08-26-2011, 01:50 PM
|
#3
|
Montana Master
Join Date: Jan 2007
Location: Lobelville
Posts: 2,128
M.O.C. #6650
|
dwad, almost any good hitch shop can install a good hitch, a 2" receiver is a must. We are in Colorado and see 5th wheels pulling boats, pontoon boats, trailer hauling Motor cycles, and tandem axle utility trailer hauling as many as 4 atv's. It can be done and done safely. Make sure its a professional hitch shop... good luck... Happy Trails...
|
|
|
08-26-2011, 02:58 PM
|
#4
|
Montana Master
Join Date: Mar 2007
Location:
Posts: 2,156
M.O.C. #6920
|
Professionally, Mor-Ryde in Elkhart Indiana will install a great 2" receiver to your rear for about $250. It's well constructed,and can tow a tank!
|
|
|
08-26-2011, 03:37 PM
|
#5
|
Montana Master
Join Date: May 2005
Location: Lake George
Posts: 1,078
M.O.C. #3847
|
Not all states allow a double tow. So you may want to check it out. Here in NY it is illegal. Also, illegal in FL. It is allowed in some states, so I would check it out with your state and any other states you plan to travel in.
|
|
|
08-26-2011, 03:41 PM
|
#6
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I've put a hitch on my last 2 Montanas. Normally I've supported hitch installation on about every inquiry I've responded to ... but ...... I have owned a brand new 2000 2850RK. Unfortunately with the early Keystone Montanas, you don't have a "real IBeam" frame, but a 10" welded together IBeam substitute. If you take a look at the two beams running lengthwise under your fiver, you'll readily see they are fabricated from relatively thin sheet steel welded together to form a facimilie of an IBeam. Somewhere around 2004 Keystone went with a true forged IBeam frame. Unless the boat you speak of is a little 10' john boat with a 15 hp Johnson, I'd strongly recommend against any hitch installation. There's really nothing structurally there to attach a hitch to. IMHO take it or leave it.
|
|
|
08-27-2011, 02:15 PM
|
#7
|
Montana Master
Join Date: Nov 2007
Location: Atlanta
Posts: 908
M.O.C. #7915
|
Quote:
quote:Originally posted by dieselguy
I've put a hitch on my last 2 Montanas. Normally I've supported hitch installation on about every inquiry I've responded to ... but ...... I have owned a brand new 2000 2850RK. Unfortunately with the early Keystone Montanas, you don't have a "real IBeam" frame, but a 10" welded together IBeam substitute. If you take a look at the two beams running lengthwise under your fiver, you'll readily see they are fabricated from relatively thin sheet steel welded together to form a facimilie of an IBeam. Somewhere around 2004 Keystone went with a true forged IBeam frame. Unless the boat you speak of is a little 10' john boat with a 15 hp Johnson, I'd strongly recommend against any hitch installation. There's really nothing structurally there to attach a hitch to. IMHO take it or leave it.
|
Agree, I would not do it.
|
|
|
08-27-2011, 05:20 PM
|
#8
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
+1
Quote:
quote:Originally posted by Hooker
Quote:
quote:Originally posted by dieselguy
I've put a hitch on my last 2 Montanas. Normally I've supported hitch installation on about every inquiry I've responded to ... but ...... I have owned a brand new 2000 2850RK. Unfortunately with the early Keystone Montanas, you don't have a "real IBeam" frame, but a 10" welded together IBeam substitute. If you take a look at the two beams running lengthwise under your fiver, you'll readily see they are fabricated from relatively thin sheet steel welded together to form a facimilie of an IBeam. Somewhere around 2004 Keystone went with a true forged IBeam frame. Unless the boat you speak of is a little 10' john boat with a 15 hp Johnson, I'd strongly recommend against any hitch installation. There's really nothing structurally there to attach a hitch to. IMHO take it or leave it.
|
Agree, I would not do it.
|
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
08-28-2011, 01:25 PM
|
#9
|
Montana Master
Join Date: Aug 2006
Location: merced
Posts: 983
M.O.C. #6171
|
I have done it on my last two trailers with no ill effects. I do over kill on the hitch construction. I not only build a hitch across the back but also extend the reciver back in 2 or 3 feet into trailer and add another cross brace to distrubute the weight and twisting.
For years I towed a 20' Bayliner behind my 5th wheel. Total lenght 73' And yes it was legal. They did changed the law about 4 or 5 years ago to 65' max.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|