Help Diagnosing Slide Creep

[rapidrobert]

Have problem with slide creep. When traveling all three slides will. Creep. To travel I shut all three valves on pump. This stops creep in the two small slides but the big one continues to creep. Does this mean the problem is in this cylinder?

[twindman]

I am sitting in Lippert customer service area while the fix my (same) problem. I took it to Tiara and they didn't have the pressure gauges to check out the hydraulics. Hope we get out of here soon since we need to be in El Paso Oct. 6 (Mon.).
So when checking with a dealer, make sure they have fixed this issue before.

[DQDick]

My understanding from having had a one slide problem is that it could also one of the switches.

[waynemoore]

I had this same problem with my Mountainner. The fluid was a bit low, added to about 1/4 in from the bottom of the fill. That solved the problem.

[1retired06]

I also had creep on one slide. Loose hydraulic connection. Tightened and that stopped the creep.

[8.1al]

Do a search for "lipsheet 0186" this may help you determine if you have a bad cylinder