|
05-26-2017, 10:59 AM
|
#1
|
New Member
Join Date: May 2017
Location: Clearwater
Posts: 1
M.O.C. #19899
|
Montana Living
I became an empty nester last summer and realized I wouldn't have anyone with me so why was I living in a condo I didn't need anymore. I am now living full time a 2012 Montana that's like new. I love it! I'm doing the reverse snowbird thing, Florida in the summer and North or South Carolina in the winter.
I do need some help. Apparently, the people who had it before let the water from the shower door drip on the laundy access door and now the door is falling apart. I'm not sure how to repair since a whole door is needed. The problem I have is the carpet, any ideas on how to save the carpet from the door?
|
|
|
05-26-2017, 12:42 PM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Welcome to the forum! I can't help much on this issue since our rig doesn't have the laundry door you're talking about.
|
|
|
05-26-2017, 07:37 PM
|
#3
|
Seasoned Camper
Join Date: May 2017
Location: Colorado Springs
Posts: 65
M.O.C. #19902
|
Brand new Owners
Hi all, introducing Roger and Joni, who went to go "just looking" at Montanas today and BOUGHT ONE! We currently live in Colorado Springs, CO with our dogs. We are retired from the Army. We plan to become full timers soon, and do some traveling. For the summer we will be at Gunnison, CO on and off and make a trip to Sunriver, OR for a reunion. We have been rving for 27 years, but this is our first Montana!
|
|
|
05-26-2017, 08:11 PM
|
#4
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,160
M.O.C. #6433
|
I have the same laundry door but never paid any attention to construction. I would think you could just remove the door and see how the carpet is attached. Probably short nails/tacks or staples. Since the door is already coming apart it shouldn't be hard to get the carpet off even if you destroy the door in the process. Measure the dimensions of the wood and go to Home Depot or Lowes and get a piece of good quality plywood cut to that size, including matching thickness. Then reattach the carpet to the new door.
I would also be concerned about the floor around that door.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-26-2017, 08:19 PM
|
#5
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,160
M.O.C. #6433
|
Quote:
Originally Posted by tumbleWeeds
Hi all, introducing Roger and Joni, who went to go "just looking" at Montanas today and BOUGHT ONE! We currently live in Colorado Springs, CO with our dogs. We are retired from the Army. We plan to become full timers soon, and do some traveling. For the summer we will be at Gunnison, CO on and off and make a trip to Sunriver, OR for a reunion. We have been rving for 27 years, but this is our first Montana!
|
Since you are a new member let me suggest that in a case like this you start a new thread rather than add a comment to existing thread. Comments on an existing thread should pertain to the original discussion point of that thread.
Other than that, welcome to the forum.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
05-28-2017, 08:50 PM
|
#6
|
Seasoned Camper
Join Date: Feb 2013
Location: Idaho Falls
Posts: 87
M.O.C. #13238
|
In reference to the laundry door in the floor, I have now taken them out of two rigs and just went with the solid floor. The carpet is stapled about a thousand times on the edges. First start by taking the screws out of the hinge and them a long process of removing staples carefully to save the carpet. Not fun but not too hard.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|