|
|
06-26-2018, 08:31 AM
|
#1
|
New Member
Join Date: Jun 2018
Location: Priest River
Posts: 7
M.O.C. #21973
|
Best heated hose?
Hi, I'm a new Montana owner (2006 RKS) and live full time in North Idaho. Im preparing in advance for the winter by gathering the things I need to winterize like skirting and heated hose. There are a couple of heated hoses available that are made for RV's like Camco etc and I was wondering if anyone could offer their opinion on the best brand from their experience? Thanks!
|
|
|
06-26-2018, 09:13 AM
|
#2
|
Montana Master
Join Date: Sep 2014
Location: Full Timer In Naples, Florida
Posts: 1,049
M.O.C. #15731
|
When we lived in Memphis. I made a one from an ordinary rv garden hose, wrapped with heat tape then covered with foam pipe insulation then black taped. Worked great and a quarter of the price of a heated hose.
__________________
2017, 3500 Ram Big Horn, 4x4, Crew Cab, DRW, Aisin Transmission, 4:10. Curt Q20, 2014 Mountaineer 331 RLT, Sailun's on the rv and truck.
|
|
|
06-27-2018, 07:58 AM
|
#3
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Quote:
Originally Posted by Eagleback
When we lived in Memphis. I made a one from an ordinary rv garden hose, wrapped with heat tape then covered with foam pipe insulation then black taped. Worked great and a quarter of the price of a heated hose.
|
This has worked well for me too. I also leave some enough of the heat tape on the end of the wrap to wrap the SPIGOT too. I then wrap over the spigot with fiberglass insulation and duct tape. Have never had a freeze up doing it this way.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
06-29-2018, 06:03 AM
|
#4
|
Established Member
Join Date: Sep 2017
Location: Camden
Posts: 40
M.O.C. #20575
|
Quote:
Originally Posted by Eagleback
When we lived in Memphis. I made a one from an ordinary rv garden hose, wrapped with heat tape then covered with foam pipe insulation then black taped. Worked great and a quarter of the price of a heated hose.
|
I also make one from an RV Drinking water hose. I wrap the hose with heavy duty aluminum foil as it is a good conductor to transfer heat from the heat trace cable to distribute the heat to the entire hose. I then spiral tape (electrical) the heat trace cable to the hose. I use wire ties to secure the foam pipe insulation. I place the plug for the heat trace at the RV water connection end of the hose (the excess extends out of the convenience center outlet at the bottom) and I use an extension cord that has a light so I can verify it has power. I also use a towel to close and insulate the opening at the bottom of the convenience center. I throw everything away (except the heat trace cable) each spring. No issues so far.
Goose
|
|
|
06-26-2018, 09:15 AM
|
#5
|
Montana Master
Join Date: May 2018
Location: livingston,tx
Posts: 558
M.O.C. #21685
|
Welcome to the forum.
|
|
|
06-26-2018, 11:47 AM
|
#6
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Welcome to the forum! We've had a Pirit heated hose for 8 years of fulltiming now and it's done well for us.
|
|
|
06-26-2018, 10:00 PM
|
#7
|
New Member
Join Date: Jun 2018
Location: Priest River
Posts: 7
M.O.C. #21973
|
The Pirit may be a better quality than the Camco...at least that is what I am hearing.
Thanks for your input!
|
|
|
06-26-2018, 11:46 AM
|
#8
|
Montana Fan
Join Date: Sep 2015
Location: Eureka Springs
Posts: 432
M.O.C. #17829
|
Quote:
Originally Posted by Muttley
Hi, I'm a new Montana owner (2006 RKS) and live full time in North Idaho. Im preparing in advance for the winter by gathering the things I need to winterize like skirting and heated hose. There are a couple of heated hoses available that are made for RV's like Camco etc and I was wondering if anyone could offer their opinion on the best brand from their experience? Thanks!
|
I use a Pirit heated water hose and it has performed well. The coldest I've experienced was -1 degrees.
Also, if you're preparing for winter, I would suggest skirting your fiver.
|
|
|
06-26-2018, 09:58 PM
|
#9
|
New Member
Join Date: Jun 2018
Location: Priest River
Posts: 7
M.O.C. #21973
|
Oh yes! That goes without saying! Skirting is a must. The hose has been my dilemma...Thanks for your feedback!
|
|
|
10-15-2018, 09:12 AM
|
#10
|
Established Member
Join Date: Jan 2018
Location: Arlington
Posts: 19
M.O.C. #21018
|
Quote:
Originally Posted by Razrbk
I use a Pirit heated water hose and it has performed well. The coldest I've experienced was -1 degrees.
Also, if you're preparing for winter, I would suggest skirting your fiver.
|
We’re in the market for a heated hose, but have two significant questions: can this be our all time hose (we’re going to be parked for a long time) in north Texas where we can see all types of weather in a single day. We don’t anticipate long stretches of freeze, but I’ve been surprised before. We can safely assume it will hit 100+ for weeks at a time in the summer it’s already in the 40s today. We need a longer hose as it is, so I was thinking we could just use the 50’ Pirit hose year-round. What are your thoughts? Also a concern is the distance from the water faucet to the electrical outlet - I seriously doubt it will reach without modification to the box or an extension cord. What have you all done for that so that you don’t void your warranty?
|
|
|
10-15-2018, 11:28 AM
|
#11
|
Montana Fan
Join Date: Sep 2015
Location: Eureka Springs
Posts: 432
M.O.C. #17829
|
Quote:
Originally Posted by CanalesPac
We’re in the market for a heated hose, but have two significant questions: can this be our all time hose (we’re going to be parked for a long time) in north Texas where we can see all types of weather in a single day. We don’t anticipate long stretches of freeze, but I’ve been surprised before. We can safely assume it will hit 100+ for weeks at a time in the summer it’s already in the 40s today. We need a longer hose as it is, so I was thinking we could just use the 50’ Pirit hose year-round. What are your thoughts? Also a concern is the distance from the water faucet to the electrical outlet - I seriously doubt it will reach without modification to the box or an extension cord. What have you all done for that so that you don’t void your warranty?
|
Q1 - yes, as mentioned, unplug as needed
Q2 - N/A for me. I plug into post. I would think an appropriately rated outdoor
extension cord would work fine. Warranty - contact company or just keep
it to yourself.
|
|
|
06-27-2018, 04:20 AM
|
#12
|
Montana Fan
Join Date: Apr 2018
Location: Omaha
Posts: 143
M.O.C. #21598
|
I’ve been using the same Pirit hose for the last few years. It’s been through -10 and done well.
__________________
2017 HC 345RL
2015 F-250
|
|
|
06-27-2018, 08:49 AM
|
#13
|
New Member
Join Date: Jun 2018
Location: Priest River
Posts: 7
M.O.C. #21973
|
Thanks!
|
|
|
06-27-2018, 08:50 AM
|
#14
|
New Member
Join Date: Jun 2018
Location: Priest River
Posts: 7
M.O.C. #21973
|
Is there a particular source for the Pirit you like?
|
|
|
06-27-2018, 10:49 AM
|
#15
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Got mine from Amazon, but you have to search for Pirit hose. Camco's apparently paying so heated hose only shows them. Home Depot and Menard's carry it on line. Menards is the lowest price before shipping, but if you have Amazon prime that's probably the low price because the dudes are heavy.
|
|
|
06-27-2018, 10:53 AM
|
#16
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
One other thing about heated hoses and Montana's. Pirit comes with the thermostat attached to the hose. I cut it loose so it's not picking up heat from the hose. Also, you want to make sure the thermostat is well out of the convenience center. I use a car wash sponge to fill the hole around the water hose and other cables that come in there.
|
|
|
06-27-2018, 02:39 PM
|
#17
|
Montana Master
Join Date: Sep 2017
Location: Tacoma
Posts: 1,567
M.O.C. #20475
|
Welcome to the MOC family from Washington St! Pirit hose is what we have also.
__________________
Bob & Carol Washington St
2017 HC HM352RL 2018 Dodge 3500 laramie CC LB 4x4
Curt Q25 with puck system, Factory air bags
Happy Trails
|
|
|
06-28-2018, 02:42 PM
|
#18
|
Montana Fan
Join Date: Sep 2015
Location: Eureka Springs
Posts: 432
M.O.C. #17829
|
Side note: fellow winter camper failed to test his plugin because he assumed since his 50amp hookup worked fine, the other would also. Bad assumption froze up.
|
|
|
07-02-2018, 03:56 PM
|
#19
|
Montana Master
Join Date: Jan 2018
Location: Northville, NY
Posts: 807
M.O.C. #21158
|
I use a 25' Pirit hose. I put my in line water filter in the convenience center so it won't freeze and that in turn puts the thermostat well below the floor. I also put a piece of foam in the access hole to keep the cold out and the heat in. We have a private site in the place where we get the cold weather (usually down to 10 or 15, but have seen zero) so I wrapped separate heat tape and foam insulation on the spigot. When it gets really cold I go farther South. Have had no problems in 3 yrs of this set up.
__________________
Jim B
2017 Lariat F-350 FX4, CC, SB, 6.7 PSD 4WD
2018 MONTY 3731FL, at our private winter site in GA
|
|
|
09-10-2018, 03:28 PM
|
#20
|
Established Member
Join Date: Feb 2012
Location: Mesa
Posts: 31
M.O.C. #12209
|
Buy the pipe insulation to go around your hose. Get a heat trace line with a thermostat that plugs into 120 vac. Now take the hose and connect it to your city water inlet. Take the heat trace and from just outside the trailer tape it to the hose every couple feet until you run out of heat trace. Cut the hose there and put on a new hose bib. Now wrap the hose with the pipe insulation and tape every 6 inches. Done.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|