Digital thermostat

[brooksider]

Woulld someone be able to help me out with the instalation and wireing for replaceing the factory thermostat with a digital one. The digital thermostst is a UPM THM101B digitial. It has 4 connecttions and I believe that the trailer has 6 wires as my old cougar did. (Have not looked at the Monty yet).

Joe

[jackel1959]

Joe,
I did the upgrade when we had our 2004 Mountaineer and it wasn't to hard. I used a "LUX" programmable thermostat and the hook up went the same as described in the following articles. I also installed a switch so that I would have the HI and LOW fan settings for the AC. Here are a couple of links that should help you out with your install: http://www.rverscorner.com/hunterstat.htm

http://danzemke.com/ExternalPosts/Hu...structions.pdf

Jack

ON EDIT:
Joe,
I just re-read your post about the thermostat. What model year is the rig you are trying to replace the thermostat on? If it is the 2010, you already have a digital thermostat. The links I provided talk about replacing and analog with a digital.

[brooksider]

Thanks Jack. I think this will help me out. I hope to look at it next week.
It is a 2010 but the thermostat is anolog. Not very accurate.
Joe