|
08-04-2008, 05:23 PM
|
#1
|
Montana Master
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
|
Toilet riser
Has anyone installed the Thetford toilet riser that is available from CW etc? Description implies that it should work with our Sealand toilets. Just wondering if it is a successful addition, No leaks or other hidden pitfalls?
Any insights much appreciated.
|
|
|
08-05-2008, 05:27 AM
|
#2
|
Montana Master
Join Date: Feb 2008
Location: Winthrop Harbor
Posts: 1,832
M.O.C. #8160
|
I don't know about CW but we had the riser installed in our 3400RL prior to taking delivery. It seems to wobble somewhat and there is some seepage. It may be because the riser overlaps the heat register which does not allow it to tighten down flush to the floor.
|
|
|
08-05-2008, 05:59 AM
|
#3
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
I installed the riser under our Thetford toilet and there is no rocking. It's completely stable. It sure makes it easier to sit when you've just gone through a knee revision and back surgery that included two laminectomies and three fusions.
Orv
|
|
|
08-05-2008, 06:18 AM
|
#4
|
Montana Master
Join Date: Feb 2008
Location: Winthrop Harbor
Posts: 1,832
M.O.C. #8160
|
Ours is a Sealand and as I mentioned the riser seems to cover part of the outside portion of the register. Does yours miss the register? Our Cedar Creek had a Thetford which we liked better than the Sealand. I'm trying to find out if I can replace it without a lot of extra work.
|
|
|
08-05-2008, 06:45 AM
|
#5
|
Montana Master
Join Date: Sep 2007
Location: Texas City
Posts: 5,736
M.O.C. #7673
|
John,
I have a riser for a Sealand sitting on the floor in the garage. I believe it is 3". I don't know the MFG, but it was on the Sealand 510.
I'm sure we can come to some arrangement.
When I was having problems with the old Sealand, I asked for a replacement and paid the difference for an upgrade to the 510 model with sprayer hose (good choice). I needed it for my knees. There are different heights to toilets and I opted for the 17" and the riser. When DW sat down, her feet didn't reach the floor. (Bad choice) So I (had it)removed the riser.
Edited: The riser I have may be the 2 1/2 Inch riser and it fits the Sealand 510 model.
|
|
|
08-06-2008, 03:26 AM
|
#6
|
Montana Master
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
|
Wayne,
Thanks for the offer. I guess this is a case where timing is everything, just before I saw your message, I called the RV shop where our trailer is having its fridge fixed, and it turned out that they had a riser in stock, so I just asked them to install it for me while they had the trailer there. We are hoping to go on a camping trip after we pick up the trailer, having the riser already in place will make things much easier. (Donna is waiting for a knee replacement and finds the present toilet too low).
Again, thank you for the offer, maybe someone else will this thread and take you up on it.
(on edit: there is no heat vent in the toilet room of our '05, so that should not be a problem).
|
|
|
08-06-2008, 04:14 AM
|
#7
|
Montana Master
Join Date: Sep 2007
Location: Texas City
Posts: 5,736
M.O.C. #7673
|
I'm glad you found one close by and having it installed. One item I found when they installed the new riser and toilet on mine is that the technician (Not my usual one) use wood screws that protruded down into the basement by about an inch. I did not like that at all, and as we know, the type of action that contraption gets, like rolling, rocking and pogo, those wood screws are really not the way to go.
When we removed the riser we went down with bolts with supporin flat washers. It's as solid as a rock now.
By the way, if the new riser doesn't work out for Donna, point her to a taller tree to lean against!
|
|
|
08-06-2008, 02:44 PM
|
#8
|
Montana Fan
Join Date: Dec 2006
Location: Kingsville
Posts: 473
M.O.C. #6588
|
We used a riser for 4 yrs in the old TT with absolutely no problems. It was a Thetford but worked beautifully. The new fiver had the tall toilet so no riser was needed. Bob
|
|
|
08-06-2008, 03:20 PM
|
#9
|
Montana Master
Join Date: Feb 2003
Location: Englewood
Posts: 3,095
M.O.C. #164
|
I installed the riser 4 years ago on the Thetford easy install no problems after 4 years we love it!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Toilet or not
|
pineranch |
Maintenance |
3 |
07-16-2014 10:49 AM |
Maint on TV riser/motor 2012 Montana 3455SA
|
fawnhaven |
Maintenance |
4 |
06-15-2014 01:57 PM |
Toilet
|
Dont |
Montana Problems, Problem Solving & Technical Help |
29 |
01-02-2008 03:36 PM |
New Toilet
|
Trailer Trash 2 |
Montana Problems, Problem Solving & Technical Help |
0 |
08-28-2005 11:46 AM |
Toilet Riser
|
kdeiss |
Additions & Improvements |
0 |
03-18-2004 01:22 PM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|