|
|
11-20-2013, 11:42 AM
|
#21
|
Montana Master
Join Date: Feb 2008
Location: Winthrop Harbor
Posts: 1,831
M.O.C. #8160
|
I had a similar problem separating the head of the hitch from the rest of it. Easy to remove but a pain to re-install as the pin just fits the hole and required a steady hand to keep it aligned and a hammer to tap it in place. My method works for me, good luck with yours.
|
|
|
11-20-2013, 12:23 PM
|
#22
|
Montana Fan
Join Date: Jan 2013
Location: Fountain Inn
Posts: 209
M.O.C. #13142
|
Not to steal thread from Rainer but I wanted to "run this idea by you guys." On my B & W Companion head I attach two locks in place of pins at head when I unhook. Got to thinking about some "dude" lifting the head while we shop at Walmart or someplace. Those heads could bring good prices at scrap yard. Locks can be cut with tools but locks may slow the thieves.
|
|
|
11-20-2013, 01:44 PM
|
#23
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,550
M.O.C. #2283
|
I have a B W Companion. I take it apart then I go to the shop and get Chris. At 6 foot 5 and 240 pounds its easy. I can do it by myself but why bother I'm 6 foot and 170 pounds. If you would like you can borrow him but you haft to feed him.
Lynwood
The thing I worry about is somebody uncoupling it while I'm parked so I lock the hitch leaver so it can't be.
|
|
|
11-20-2013, 05:43 PM
|
#24
|
Montana Master
Join Date: Apr 2013
Location: Oceanside
Posts: 534
M.O.C. #13378
|
Quote:
quote:Originally posted by mlh
The thing I worry about is somebody uncoupling it while I'm parked so I lock the hitch leaver so it can't be.
|
I can't budge the hitch lever if the weight of my Monte is on it. I doubt if anyone else could either, since you'd probably bend the lever before it uncouples.
|
|
|
11-21-2013, 04:55 AM
|
#25
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
That's caused by too much tension at the pin depending on how the load is carried, how you stop and other things that can cause the Monte load to stress the hitch pin. This is not always the case so checking the lever is a great idea. Lot's of clowns out there, who just might give that lever a tug after removing the locking pin. This possibility is also why many use a bed saver, too, for when they forget to check and when the mishap occurs some buffoon(s) will laugh their heads off thinking this is funny.
I like the idea of having a gorilla to help with the heavy work, but feeding them is expensive assuming they only work for food. So far my current method makes it so I can do it by myself and I'm only 5'9" and 170 lbs but I have the strength of someone 5'2" and 110 lbs.
Mach111, you've got some good thinking there. I have a lock at the locking pin so the lever cannot move until I want it to and a lock at the large cylinder at the hitch head/base - I used these a lot when towing professtionally. It's rare when the hitch is by itself (except when tooling around after dropping the Monte at its camp location). One of these days I'll have a means to use the locking pins at the four legs at the base for the best in security for the hitch. But it's a lot of keys to carry, ugh. I realize this only improves my odds to prevent theft and vandalism, but I just have to make it tougher than the next person.
|
|
|
11-21-2013, 05:49 AM
|
#26
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Straying away from the hitch question ... I use these little items along with a couple of master locks ... one on one of the head pins ... the other on one of the base pins of my Curt hitch. http://www.etrailer.com/Locks/Reese/RP58093.html
Like anything else, if someone wants something of yours bad enough ... they'll figure out a way to take it ... these will just maybe slow them down enough that they decide not to try.
|
|
|
11-21-2013, 08:12 AM
|
#27
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
Those plates are what I need for the base's pins on the four legs that insert to the rails. My problem is that I have a Valley/Husky hitch and the pins are not the Reese style that has the recess around it. My pins have a hole where the clevis pin inserts and is a completely different style from what the plates can use. So now it's a matter that I have to buy the Reese style of pins, then these four hasps, then four locks. I'm just temporarily tired of buying more locks and needing another key to save or combination to remember.
|
|
|
11-21-2013, 11:28 AM
|
#28
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Art ... I dunno what a set of Reese pins cost, but if you have a friend or a friend of a friend that has access to a lathe ... have him cut grooves in the pins you have and offer a 12 pack or something for his time. I'd do it in a heartbeat but distance weighs heavy here. To keep honest people honest ... all you need is one lock ... reports of people pulling your rail pins are extremely few and far between.
|
|
|
11-21-2013, 12:58 PM
|
#29
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
Replacements pins are less than 20 bucks since I don't know anyone with a lathe. I'd probably use at least two locks at the two front pins, just because I'd hate a mishap to occur if the other two were stolen. With locks in place I do check more often.
|
|
|
11-21-2013, 03:35 PM
|
#30
|
Montana Master
Join Date: Jan 2012
Location: Copperas Cove
Posts: 1,426
M.O.C. #12096
|
Since I rarely use the bed of my truck for anything else anymore and I use it more for towing, it is easier to leave the hitch in the truck and just remove it when I need the bed. I also leave my generator in the bed chained to it with a big ole chain. May use the bed once or twice a year to haul stuff that takes up the whole bed.
|
|
|
11-21-2013, 04:23 PM
|
#31
|
Montana Master
Join Date: Dec 2010
Location: Sioux Falls
Posts: 664
M.O.C. #10985
|
I just use my old Oliver tractor. Have to be careful with my jerky controls though.
|
|
|
11-24-2013, 04:35 PM
|
#32
|
Montana Master
Join Date: Nov 2012
Location: Rancho Santa Margarita
Posts: 633
M.O.C. #13025
|
I have a superglide that is extremely heavy. I mounted a 12v ATV winch from Harbor Freight from the rafters in my garage. Bought it on sale. Lower it onto a furniture dolly (HF) also. All I do is push a button. I bought a plug that goes into my trailer connection to get power. The 12v was cheaper than the 110v.
__________________
Russ and Linda, So. California
2004 Chevy Silverado 2500 HD, D/A, SRW, SB
2005 2955RL, Pullrite Superglide 16K hitch. Bridgestone Duravis R500 tires. EZ Flex Equilizers with wet bolts.EMS HW50C, Disk brakes
|
|
|
12-11-2013, 03:35 AM
|
#33
|
Montana Master
Join Date: Feb 2008
Location: Hillsboro
Posts: 593
M.O.C. #8238
|
I get the hitch loose, then simply drive my tractor up to the back and lift it out with the bucket! Of course, it does help to have a reason for the tractor, i.e. a farm!!!
__________________
Terry and Patsy
Vietnam Veteran, US Navy
2017 3810
2015 GMC Sierra 4X4 3500 SRW
|
|
|
12-11-2013, 11:36 AM
|
#34
|
Montana Fan
Join Date: Sep 2013
Location: Daleville
Posts: 161
M.O.C. #13784
|
Sad to say.........Grunt - Grab & Go. That won't happen much longer.
Mike
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|