Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > Tow Vehicles & Towing
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 08-21-2018, 10:00 PM   #1
Docweems
Established Member
 
Join Date: Feb 2012
Location: Sioux Falls
Posts: 20
M.O.C. #12222
Exclamation Help! Hooking up at 45 degree angle

Need advice on pulling out of tight site.
I got backed into a tight site and I have to pull out tomorrow am. It looks like I can pull out more easily if I back in the truck to hook up to the 5th wheel pin at about a 45 degree angle to the right side of the RV (40 ft Montana 3402 RL). I normally back in straight from the front to hook up. Have not done it at an angle. Any advice on if or how it might work this way?
Doc
Docweems is offline   Reply With Quote
Old 08-22-2018, 04:43 AM   #2
Eagleback
Montana Master
 
Join Date: Sep 2014
Location: Full Timer In Naples, Irma tried to kill us, but were still here.
Posts: 714
M.O.C. #15731
I hook all the time not being straight to the unit and 45 is not out of the question as i have had to hooked 90 to pull a unit out, just watch your tail gate as it could hit the front of the 5ver at that angle and try to keep the pin at the right height so the corner of the pin box dosent dig in to the hitch saddle.
__________________
2017, 3500 Ram Big Horn, 4x4, Crew Cab, DRW, Aisin, 4:10. Curt Q20, 2014 Mountaineer 331 RLT
Eagleback is offline   Reply With Quote
Old 08-22-2018, 05:35 AM   #3
bethandkevin
Montana Master
 
Join Date: Mar 2012
Location: Davison
Posts: 765
M.O.C. #12331
You can hook up and pull away at any angle that you like. Be mindful of the swing behind the axles when you do so. I always have a spotter when pulling out onto the road from a site.
bethandkevin is offline   Reply With Quote
Old 08-22-2018, 06:00 AM   #4
beeje
Montana Fan
 
beeje's Avatar
 
Join Date: Oct 2015
Location: carroll county
Posts: 493
M.O.C. #17894
I have hitched up at an angle many times. 45 degrees may not work as the tailgate may hit the camper. You may have to have someone raise the gate as you back up once the pin clears the gate.
__________________
2014 GMC 3500 Dually diesel 4x4 CCLB Curt q24
2011 Montana 3455 SA 6 point level up Disc brakes
Progressive EMS Valterra tank valves Sailun G637 tires Adp fridge control All led lighting
beeje is offline   Reply With Quote
Old 08-22-2018, 06:29 AM   #5
BB_TX
Montana Master
 
Join Date: Oct 2006
Location: McKinney
Posts: 4,575
M.O.C. #6433
When I have, I back under the pin box just enough to raise the tailgate before it hits the trailer. Then I raise the pin box to where bottom of the pin box plate is about level with the top of the hitch plate. Backing straight, it would normally be an inch or so below to ride up onto the hitch. But the pin box plate will not ride up on the hitch very well at that angle since you are not backing directly to the upturned front lip. Otherwise no problem.
__________________
Bill & Patricia

2007 3075RL
2012 F350 SRW CC LB FX4 6.7
BB_TX is offline   Reply With Quote
Old 08-22-2018, 07:07 AM   #6
DQDick
Montana Master
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 15,171
M.O.C. #11455
If someone has told you it can't be done it could be because they have a Pullrite or similar hitch. On those "self sliders" they are right, you do have to hookup straight.
__________________
Dick and Joyce
2017 3720 RL
2011 Dodge Maxi Cab
3rd AC, Bathroom door mod, etc.
DQDick is online now   Reply With Quote
Old 08-22-2018, 09:12 AM   #7
dhuhn
Seasoned Camper
 
dhuhn's Avatar
 
Join Date: Mar 2015
Location: Sequim
Posts: 96
M.O.C. #17176
Send a message via MSN to dhuhn
As Dick said if you have a slider hitch you have to be straight on to hook up. The other hitches i dont see a problem with.
__________________

Dan & Sandy Huhn
2016 Montana 3720 2015 Chevy 3500 SWD Duro Max
Prev 2012 High Country 313RE 2012 Chevy 2500 DMax
dhuhn is offline   Reply With Quote
Old 08-22-2018, 11:10 AM   #8
Docweems
Established Member
 
Join Date: Feb 2012
Location: Sioux Falls
Posts: 20
M.O.C. #12222
It worked! Thanks for all the advice, I
Did have to take it carefully and get the hitch and pin lined up really well. The site was not level which complicated it. Also the advice about getting the pin just slightly higher than the hitch saddle was important as well. Once the hitch slid “clicked” into place I knew we were good. We could then pull out of the site easily. Again thanks to your great advice it all worked as expected.
Doc
Docweems is offline   Reply With Quote
Old 08-22-2018, 11:39 AM   #9
jeffba
Montana Master
 
Join Date: Oct 2017
Location: Bastrop
Posts: 1,020
M.O.C. #20753
I do it and have the added wrinkle of walking the truck up the curb and engage the hitch at the same time. (think 3D checkers) One thing I found that works on my setup, once the angle gets bigger the tailgate can stay down and not dig into the front of the Monty. have not done it enough to be able to just lower the tailgate and not worry.
__________________
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW
Poke super lignum unum et diem
jeffba is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 07:03 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.