|
09-16-2017, 02:04 PM
|
#1
|
Montana Master
Join Date: Dec 2010
Location: Sioux Falls
Posts: 663
M.O.C. #10985
|
Wiring color code
I need to know the colors of the brake, tail, clearance lights on my Montana 3475.
I had them written down at one time but what I have done with them is a mystery. I think the running ligts are brown and that is what I neeed to get into. i don't wnat to just start cutting.
|
|
|
09-16-2017, 08:18 PM
|
#2
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Etrailer.com has easy to read diagrams. RV basics.com is another source. If I remember correctly, running lights are green.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
09-16-2017, 08:32 PM
|
#3
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
09-16-2017, 10:09 PM
|
#4
|
Montana Master
Join Date: Sep 2017
Location: Tacoma
Posts: 1,567
M.O.C. #20475
|
Your running lights run off the brown wire
|
|
|
09-17-2017, 01:10 PM
|
#5
|
Montana Fan
Join Date: Nov 2004
Location: Hudson
Posts: 480
M.O.C. #2446
|
click on a picture from here. Your mileage may vary.
https://www.google.com/search?q=trai...w=1622&bih=853
__________________
Chris Donna and Oliver the rescue Dog.
Old 3255RL It is a weekend warrior and less than 15K miles. Mostly sits at the house. Home is where the heart is.
|
|
|
09-17-2017, 07:48 PM
|
#6
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,676
M.O.C. #12947
|
I recently replaced our rear brake/tail/turn signal lights with LED units, and the wiring colors were not the standard you would expect. I connected the new lights, and the functions were backwards. You can get a 12 volt tester with a sharp point that can be used to puncture the insulation so you don't have to cut the wires.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
09-18-2017, 04:08 AM
|
#7
|
Montana Master
Join Date: Mar 2011
Location: Okeechobee
Posts: 2,150
M.O.C. #11206
|
Hi
Keystone doesnt follow any wiring standards you will have to do some testing to figure out what wire goes where.
Phil P
__________________
2009 Montana 3665RE
2009 Duramax 3500 DRW quad cab
personal web page https:// www.sallyscoffees.com
If you get a page not available then remove the "s" after HTTP
|
|
|
09-18-2017, 05:57 PM
|
#8
|
Montana Fan
Join Date: Nov 2004
Location: Hudson
Posts: 480
M.O.C. #2446
|
Led lights are different Aftermarket generally use the white wire for ground.
So if you touch the negative of the battery to ground and touch the red to the battery positive you will see the intensity difference by touching the other wire to the positive. The brighter one will be your turn or brake which will go to the standard trailer wiring for the individual turn signal. The less brighter one will go to your running lights generally Brown.
__________________
Chris Donna and Oliver the rescue Dog.
Old 3255RL It is a weekend warrior and less than 15K miles. Mostly sits at the house. Home is where the heart is.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|