|
07-01-2016, 06:56 AM
|
#1
|
Seasoned Camper
Join Date: Feb 2012
Location: Alexandria
Posts: 82
M.O.C. #12203
|
Norcold 1200
I am boondocking here in Assauteaque Seashore, my Norcold freezer is doing its job, at a setting of 9, but the lower half is barely keeping things cool.I have checked the fans they both appear to be working , not sure if they is running long enough to do the job. Any suggestions would be great and appreciated. I am running in the propane model. The upper rear portion is quite warm to hot. I have recently added a temporary fan in the lower have to assist with the cooling, Any suggestions would be great.
|
|
|
07-02-2016, 06:46 AM
|
#2
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Open up that top vent and look at the two metal baffles. Each should be full width of the enclosure. The bottom one of this pair should come up to within a quarter of an inch from the finned piping on the lower right side AND be bent inward to be within a quarter of an inch from the fins (vertical & horizontal). The top baffle should curve out to the inside of the slide wall and be about an inch or so at most above top of the vent. The bottom of this baffle should come down and be touching the top of the fridge or very close to it and be less than an inch inward at that point. There should be insulation behind it. Mine were bad, gave the assembly line an f grade on install. I used two more pieces of aluminum added to each baffle, insulated, screwed in place, and aluminum taped to meet requirements of norcold on the install document. My fridge now runs really well. Bet yours is not as above. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
07-02-2016, 09:49 AM
|
#3
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
Check the thermistor connector inside the frig light cover. Unplug and plug back in a few times. Make sure terminals appear to be making connection. Happened to us in Goshen. Keystone sent us to local supplier that found the problem.
|
|
|
07-02-2016, 04:03 PM
|
#4
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,697
M.O.C. #12947
|
I was having a similar problem recently. I checked the thermistor, and found the clip very rusted, so bad that the thermistor wasn't making secure contact with the fin. I just ordered a new thermistor along with a new clip. The freezer is running at 10 degrees and the sodas and beer are very cold, and this at a 5 setting.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
07-03-2016, 08:06 AM
|
#5
|
Seasoned Camper
Join Date: Feb 2012
Location: Alexandria
Posts: 82
M.O.C. #12203
|
Thanks for the help, I will order the thermistor and hope that this corrects the problem.
|
|
|
08-08-2016, 11:35 AM
|
#6
|
Seasoned Camper
Join Date: Feb 2012
Location: Alexandria
Posts: 82
M.O.C. #12203
|
I just want to give everyone an update. I replaced the thermistor and the frig is working great. I highly recommend getting a spare one.
Thanks again for the help.
|
|
|
08-08-2016, 12:58 PM
|
#7
|
Montana Master
Join Date: Oct 2007
Location: Land O Lakes
Posts: 2,751
M.O.C. #7753
|
Speaking of the 1200 series Norcold, I just got a post card from some outfit that is putting out info about a class action suit against Norcold for present and past 1200 series owners. I have had the upgrade and still ended up having to have a new cooling unit installed. Glad I got the Good Sam extended warranty. A 2500.00 repair job cost us 200.00.. Just a heads up for you 1200 series owners, keep an eye on your mail box.
|
|
|
08-08-2016, 04:33 PM
|
#8
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
We also had a new cooling unit in our 1200 Norcold. Good Sam ESP paid the bill.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|