|
07-30-2004, 07:32 PM
|
#1
|
Montana Master
Join Date: Jun 2004
Location: Mount Shasta
Posts: 1,488
M.O.C. #1685
|
Flat Tires
When cleaning the Montana last week I discovered a slow leaking rubber valve stem and had it replaced with one of the same type. This morning I went out and found another tire gong flat for the same reason, and when dropping the spare found it in the same shape. Got out the Floor jack and stands, then immediately took all five tires/wheels in to have the rubber stems replaced with metal units. Lucky it was in the driveway and not on the road.
This got me to thinking about how I would change a tire on the road if my Good Sam ERS wasn't available. I don't like to carry my 80lb. floor jack with me and I don't believe the tow vehicle's jack is up to the task. Has anyone in the group got a suggestion as to a light weight jack that will lift high enough?
Thanks,
Don
|
|
|
07-30-2004, 07:52 PM
|
#2
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Hello Don,
I carry a 20 ton hydraulic jack from Harbor Freight. Should be strong enough to lift the trailer. I also carry several blocks of wood that I can use to help adjust the height. But must admit that I'd likely simply have to call AAA to come out and do the deed!
HamRad
|
|
|
07-30-2004, 09:51 PM
|
#3
|
Montana Master
Join Date: Jun 2004
Location: San Antonio
Posts: 1,740
M.O.C. #1757
|
Nice to carry a spare jack, but I think that calling AAA would do the job. Happy rving....
|
|
|
07-31-2004, 01:03 AM
|
#4
|
Montana Master
Join Date: Nov 2002
Location: Woodstock
Posts: 1,313
M.O.C. #3
|
Quote:
quote:Originally posted by HamRad
... I carry a 20 ton hydraulic jack from Harbor Freight. Should be strong enough to lift the trailer. I also carry several blocks of wood that I can use to help adjust the height. But must admit that I'd likely simply have to call AAA to come out and do the deed! ...
|
Same here except that I have a Sears 16,000 # Bottle Jack and would call Good Sam's ERS if possible!
Craig
|
|
|
07-31-2004, 02:46 AM
|
#5
|
Montana Master
Join Date: Feb 2003
Location: Belvidere
Posts: 1,834
M.O.C. #185
|
I carry a 8 ton bottle jack I bought at Wall Mart and a couple of 2x6. I tested it in the drive way and it works fine.
regards,
Steve
|
|
|
07-31-2004, 05:03 AM
|
#6
|
Montana Master
Join Date: Dec 2002
Location: Spring Hill
Posts: 2,725
M.O.C. #59
|
I carry a bottle jack with wood blocks. No problem taking tires off.
|
|
|
07-31-2004, 06:18 AM
|
#7
|
Montana Fan
Join Date: Feb 2003
Location: Bend
Posts: 254
M.O.C. #162
|
If you have tandem axles just drive one tire onto some blokes of wood or those plastic load levelers. That will lift the other wheel off the ground. Loosen the lug bolts on the tire you want to remove first. Treecounter
|
|
|
07-31-2004, 06:23 AM
|
#8
|
Montana Fan
Join Date: Jul 2004
Location: Sault Sainte Marie
Posts: 192
M.O.C. #1801
|
Treecounter - I've heard of folks doing this; but, I've also heard people express a concern about overloading the other axle during this process. I'm sure that that's technically true, but I wonder about the practicality of it. Since you're not doing this a 60+ MPH on an unfriendly road, is it really an issue to use this method? Anyone?
Gordon
|
|
|
07-31-2004, 09:31 AM
|
#9
|
Montana Master
Join Date: Jun 2004
Location: Mount Shasta
Posts: 1,488
M.O.C. #1685
|
Thanks to all of you for the input. Think I'll shop for a suitable bottle jack to keep in the rig. Treecounter has an idea that may work afterall. On my last trip I actually saw a 5th wheel on I/80 pulling onto the shoulder with the left rear wheel completely gone and nothing dragging. Another rig had both right side tires flat at the same time.
Don
|
|
|
07-31-2004, 11:12 AM
|
#10
|
Montana Master
Join Date: Dec 2002
Location:
Posts: 1,804
M.O.C. #57
|
I have a piece of 2x6 cut on angle about 3 ft long. With apiece of rubber tacked that I pull or back up on. also works great for changing oil.
Gene
|
|
|
08-02-2004, 02:31 PM
|
#11
|
Established Member
Join Date: Mar 2004
Location: Villa Hills
Posts: 23
M.O.C. #1153
|
A simple device to drive the good tire onto so you can get the height to remove the bad tire is called the TrailerAid. Camping World carries it.
|
|
|
08-02-2004, 03:16 PM
|
#12
|
Seasoned Camper
Join Date: Feb 2003
Location: Clovis
Posts: 91
M.O.C. #183
|
A while back I wrote about my front aluminum wheels were thicker than the back wheels.I took it to the dealer,pictures were taken and sent to Kekstone.I was told I was out of luck,they would do nothing.Well one started leaking around the valve stem.It turned out to be a crack in the wheel.It was the thinner wheel.On the back or the wheel it says made in CHINA.
|
|
|
08-19-2004, 04:17 PM
|
#13
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
I have the same 8 ton bottle jack steves mentioned. I even had to use it last week. Lifted the wheel easily but couldn't keep me from getting dirty laying under the rig working the jack. We were hitched up and about to hit the road.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Three flat tires
|
chieflawdawg |
TIRES, Montana Tires |
14 |
10-27-2013 12:31 PM |
Flat Screen TV
|
MAMalody |
Additions & Improvements |
4 |
11-17-2008 02:38 AM |
Flat tires
|
daddydan |
Montana Problems, Problem Solving & Technical Help |
2 |
06-05-2007 01:15 PM |
Flat Tires
|
daneboy |
Tow Vehicles & Towing |
10 |
05-26-2006 05:16 AM |
Flat Tires No More
|
William H. Collier |
General Discussions about our Montanas |
4 |
04-07-2006 04:45 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|