Mor/ryde System on 2012 Montana 3455SA

[fawnhaven]

Does anybody know if the Axle on the Mor/ryde system needs any GREASE?

[jcurtis934]

Not sure what you are really asking, but here's my reply based on your post. If you are referring to the More/ryde suspension system and it has the wet bolt kit installed...there are fitting on the system that take grease from a grease gun. If you are referring to the dexter axles and the hubs/drums/bearings, then the answer is yes. I believe most montanas came with the E-Z Lube system and you need to follow directions in the owners manual or you can blow out the rear seal redering the brakes worthless, as in no stopping ability and spending way more money to correct the error. And don't let someone near your rig with an air powered grease gun. John

[rohrmann]

To add to what John said, if you haven't lubed anything yet on that rig, I would suggest getting the drums pulled to verify the brakes are good, and repack the bearings along with installing new seals. That's a long time to go without greasing a rig, suspension and wheel bearings.