Awning inline fuse

[BobTina04]

Hi Everone,
I have a 3750FL 2014
The awning lights have never worked , I understand there maybe a 3 amp Iinefuse does anyone know we’re it is located?

Thank you for your help,
Bob

[BuilderBob]

We had a problem with are awning light in our SOB before we bought our Montana. It had a inline fuse in the wiring behind the switch. I don't think Keystone put one but you never know it should be in the fuse panel under lighting. i'm not at our rig to check right now.

[jcurtis934]

I would check for 12vdc at the lights before assuming there is no power to them. Awning lights are not very high quality and probably are doa.

[Alzpitstop]

Plz help me.. I have the opposite problem with my 2018 slide out awning led.. they never turn off and I cannot find a switch. My main awning lights work with the switch board. The dealer suggested I cut the wire till I can get it back in for them to fix it.

[cpaulsen]

The fuse should be behind the switch panel like my Montana.

[Alzpitstop]

How would the fuse help me other than completely disabling the light? Is that the only way to turn it off until I get a switch put in?

[jcurtis934]

Unless you have a remote that also controls led lighting, then you have to troubleshoot the thing to see if the switch is shorted out and causing power to always be present. You could pull the switch out and measure both contacts as you move the switch to both positions. They can't operate without power, so either the switch is shorted or keystone put that function under control of a remote or under control of a computer system installed on the wall of the passthrough. It helps to relate what your model and year is and if you have the rv controlled by one of these systems.

[Mikendebbie]

Just to make sure...on my 2018 model the awning LEDs turn on with the incommand panel...see pic below...