|
11-13-2009, 02:19 PM
|
#1
|
Montana Master
Join Date: Sep 2003
Location: Sunshine
Posts: 1,445
M.O.C. #538
|
Slide out pump
Does anyone know what happened to a company by the name of "CONTROLLED MOTION SYSTEMS" ? I have one of their slide pumps on my 2004. I need a O rings for the tank. Wasted my time at several part houses, implement dealers, RV stores etc.
|
|
|
11-13-2009, 04:37 PM
|
#2
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,530
M.O.C. #2471
|
Don't know if this will help, but I GOOGLED Controlled Motion Systems and came up with this link in Goshen,IN: Controled Motion Systems. There is a phone number listed of (547) 457-5282. Hope this helps???
Jack
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
11-13-2009, 06:47 PM
|
#3
|
Montana Master
Join Date: Jun 2007
Location: St.Maries
Posts: 1,010
M.O.C. #7329
|
Take the reservior with you to a hydraulic shop and they should have the correct O ring.
|
|
|
11-14-2009, 11:46 AM
|
#4
|
Montana Fan
Join Date: Nov 2004
Location: Raceland
Posts: 409
M.O.C. #2389
|
Yes Clutch should be right .i get hydraulic rams rebuild, and a good hydraulic repair shop should have no problems, and i bet it will be quicker and cheaper then having to order anything from the factory
|
|
|
11-14-2009, 01:18 PM
|
#5
|
Montana Master
Join Date: Sep 2003
Location: Sunshine
Posts: 1,445
M.O.C. #538
|
Quote:
quote:Originally posted by jackel1959
Don't know if this will help, but I GOOGLED Controlled Motion Systems and came up with this link in Goshen,IN: Controled Motion Systems. There is a phone number listed of (547) 457-5282. Hope this helps???
Jack
|
That number is no good. I'm thinking that Lippert has them now.
|
|
|
11-14-2009, 04:17 PM
|
#6
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,530
M.O.C. #2471
|
Well then, maybe you can try calling Lippert: 1-866-524-7821. Failing that, I would take the advice of the rest and look for a good shop that does hydraulic system repairs and see if you can get the part(s) you need from them. Good luck.
Jack
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
11-15-2009, 09:35 AM
|
#7
|
Montana Master
Join Date: Sep 2008
Location:
Posts: 560
M.O.C. #8818
|
Air-Oil Products has every kind and size O-ring imaginable, you just need to know what size you need.
Click Here for Air-Oil Products O-rings.
They have a $1.00 minimum per part number / $5.00 minimum total order
(plus shipping and handling)
Order value $5-$24.99 shipping $7.50
Order value $25.00 - 99.99 shipping $8.50
Order value $100.00 - $249.99 shipping $9.50
Order value $250.00 - $499.99 shipping $12.00
Order value $500.00 - $999.99 shipping $15.00
If you strike out everywhere else, figure out what what material and size you need. I could phone order them, pick them up at their will call, and send to you USPS for a lot less than the $7.50 shipping. They are just down the road a few miles from me. You would still have the $5 minimum order charge, plus whatever the USPS is though.
|
|
|
08-14-2012, 12:10 PM
|
#8
|
Montana Master
Join Date: Nov 2003
Location: Santa Fe Springs
Posts: 4,189
M.O.C. #639
|
OK I have ordered 2 for my pump. They were so cheap I ordered 5 of them, I will sell them for what I paid for the bunch which comes to a 1.00 a "O" ring peace. plus postage it could not cost anymore than 90 cents to ship. so how about 1 buck ninty OTD or if you find it in your heart donate the extra dime for my work of S&H. send me a PM for my address...........also I only have 3 extra :O: rings in the pot...
Don
__________________
Pulling a 2004, 2980 RL an oldie but goodie.
Tow vehicle is a 2009 RED RAM 3500 DRW.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Slide Pump
|
jjackflash |
Repairs & Service |
4 |
07-08-2009 01:55 PM |
Leaking Slide Pump
|
drjjj |
Repairs & Service |
20 |
09-23-2007 03:28 PM |
Slide Pump Oil
|
mwmartin |
Maintenance |
15 |
08-04-2007 10:39 AM |
oil for slide pump
|
Dustytuu |
Maintenance |
8 |
08-31-2006 01:43 AM |
slide pump
|
rickety |
Montana Problems, Problem Solving & Technical Help |
2 |
11-23-2005 08:10 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|