|
07-31-2009, 07:39 AM
|
#1
|
Seasoned Camper
Join Date: Apr 2009
Location: Bellevue
Posts: 88
M.O.C. #9268
|
J.T. Strongs
I spent anout 6 hours installing my front 4 legs, finishing just before my beer alarm went off. So, silver bullet in hand, I went around back to see what I was in for to finish the job. Hmmm, insulated belly with no exposed crossmember forward or rear of the "C" channel which mounts the telescoping stabilizers. Are there any under the corrugated plastic cover or what's the solution? By the way, the front's are all they're advertised to be and then some!!
|
|
|
07-31-2009, 08:11 AM
|
#2
|
Montana Master
Join Date: Aug 2007
Location: Waterford
Posts: 3,693
M.O.C. #7500
|
Do the rear ones mount to a cross member? I thought they mounted to the frame. (sorry for being ignorant)
|
|
|
07-31-2009, 10:03 AM
|
#3
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,167
M.O.C. #6433
|
Although some have managed to find a way to drill into the frame at the rear, the best way (in my opinion) is to attach a 2"x4" piece of rectangular steel tubing under and across the rear area of the frame just back of the stabilizers. The tubing is cut at a 45 degree angle on each end, drilled, and screws put thru that into the frame. Then attach the JTs to that tubing.
Someone posted some pictures with dimensions on here some time ago. I followed that and it came out very well, very sturdy. Maybe they will do it again or provide the link to that post. I could not find it.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
07-31-2009, 05:19 PM
|
#4
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Our rear ones are mounted to that cross channel you mentioned, the one at the rear. I think there is a little bit of flex there but it still works well. Installing a better crossmember as Bill suggested would be even better. Ours seem to be fine, though.
|
|
|
07-31-2009, 06:26 PM
|
#5
|
Montana Master
Join Date: Oct 2007
Location: Land O Lakes
Posts: 2,751
M.O.C. #7753
|
That was my post back 18 months ago, it was a 72 inch piece of 2x3 inch by 1/8 inch wall steel box beam. I got it for about 15 bucks from a local steel fabricator. Here is the Link to my slide show. measure the distance between the outside of your frame members. It was 72 inches on mine.. It was a very easy install for me. I had just called JT's and that was the info they gave me... Dave
|
|
|
08-02-2009, 05:03 AM
|
#6
|
Seasoned Camper
Join Date: Apr 2009
Location: Bellevue
Posts: 88
M.O.C. #9268
|
Great ideas all, looks like I have a project when we get back to the stick house. The forum comes through once again.
|
|
|
08-02-2009, 02:57 PM
|
#7
|
Montana Fan
Join Date: Jun 2005
Location: Bakersfield
Posts: 214
M.O.C. #3933
|
Or.... you folks thinking about them might want to look at the SteadyFast stabilizer that does not require addition of a rear cross member. It bolts to the side frame as Tom S. mentioned above. mike
|
|
|
08-04-2009, 01:22 AM
|
#8
|
Montana Fan
Join Date: Aug 2008
Location: Reading
Posts: 135
M.O.C. #8751
|
I made my own stabilizers similar to the jt's, and used 3" steel c-channel for a support in the rear. Very sturdy. I didn't have room for the tubing as I have the slide-out bumper.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|