5th Airborne Pin Box - Montana Owners Club

William Schelling · 01-19-2009, 08:41 AM

I have a 3650 RK 2007. I want to get a 5th airborne Pin Box for the RV. Would anyone know which one fits? I do not have any numbers on my pin box that fits their codeing.

bsmeaton · 01-19-2009, 08:56 AM

wonder what pin box you have? I thought 5th airborne had all the Lippert stuff covered. Are you saying you don't have an LIP number or the LIP number you have doesn't match the chart for 5th Airborne.

William Schelling · 01-19-2009, 09:42 AM

Brad, the number that is on my king pin does not match the coding that 5th airborne has. They checked with Keystone and they don't have the numbers.

tspoon · 01-19-2009, 09:56 AM

I had the same problem, so when I was at the syracuse show I noticed that the Lippert number is on top in front. So when I got home I looked and no sticker there. I then noticed an outline of a sticker. Someone painted over the sticker with the Lippert part number on it.
I scratched off the paint and there it was.

indy roadrunner · 01-19-2009, 09:57 AM

I have the Trail Air which is a competitor but I sent them my Pin Box number and they responded with the size of TrailAir Pin I needed.

bsmeaton · 01-19-2009, 10:35 AM

Bill,

5th Airborne does have a chart to measure to come up with the replacement, but you would have to physically measure bolt spacing, length to pin, etc. Should get you close and close should be good enough. My 5th Airborne serves as a replacement for multiple pin boxes, even though they are not all exactly the same size. My 5th Airborne is actually shorter than the Lippert pinbox was by 1-1/2".

William Schelling · 01-21-2009, 08:06 AM

Brad, do you like the 5th airborne? Is it worth the money?

You may also like: