Dometic Furnace w/ Comfort Control Elect. Thermos
Does anyone have any experience or trouble with short cycling of the Dometic Furnaces being control with Comfort Control Electronic Thermostat? ( NOT REMOTE) Our unit will run for about 1 min and shut off off burner. Fan will continue to run until heat chamber has cooled down. Unit will restart again and repeat the cycle.
Dometic told our service dealer to check the wiring. It was check and connectors were replaced. The unit is still doing it. When we measured the voltage coming to the furnace it showed the Thermostat was definitely shutting off the furnace. The thermostat was replaced last year as well. I would like to go back to a mechanical type of thermostat but the wiring is different and very difficult to change.
We have check the vents to make sure they are driving the thermostat
bonkers. Everything seems as it should be. Any experiences would be appreciated.
|