![Reply](/forums/images/mo/buttons/reply.gif) |
|
07-06-2022, 10:39 AM
|
#1
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
Dometic 9200 Power Awning replacement motor
I have 2021 3855BR with a Dometic 9200 power awning. The motor in it is shot, runs but won't retract or go out. Looks like there was a flaw in design on the 9200 Awning and they stopped making it. No one has the 9200 motors in stock and I am not sure if they are making them. Has anyone had same issue and used a different motor as a replacement. Looking to see if there another motor out there that might work?
|
|
|
09-23-2022, 09:37 AM
|
#2
|
Established Member
Join Date: May 2020
Location: Green Cove Springs
Posts: 13
M.O.C. #26221
|
We’re you able to find a replacement motor/ drive mechanism for your Dometic 9200?
Same issue
Motor works but awning doesn’t retract or go out
|
|
|
09-23-2022, 10:02 AM
|
#3
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
Quote:
Originally Posted by ATwynham
We’re you able to find a replacement motor/ drive mechanism for your Dometic 9200?
Same issue
Motor works but awning doesn’t retract or go out
|
Yes, found one finally at Panther RV Products. Took about 5 minutes to swap it out. They were great, worked with me to get me one. No one was had them or would even respond when I contacted them. If I need anything in future they won my long term business. https://pantherrvproducts.com/
|
|
|
09-23-2022, 10:08 AM
|
#4
|
Established Member
Join Date: May 2020
Location: Green Cove Springs
Posts: 13
M.O.C. #26221
|
Much appreciated thanks for the very quick reply
Will look there
Question
Did you need to retract the awning to replace or were you able to replace with the awning extended…. I’m thinking not but thought I would ask given it is a gear mechanism versus the standard type
|
|
|
09-23-2022, 12:03 PM
|
#5
|
Established Member
Join Date: May 2021
Location: aiken
Posts: 10
M.O.C. #28817
|
I have same issue, 1 bad motor and one starting to slow down. Can't find a replacement in stock anywhere.
|
|
|
09-23-2022, 01:07 PM
|
#6
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
I had already retracted it and had it zip tied in place. Retracting it was a real pain. Took three of us and tall ladders.
|
|
|
09-23-2022, 01:08 PM
|
#7
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
Quote:
Originally Posted by ATwynham
Much appreciated thanks for the very quick reply
Will look there
Question
Did you need to retract the awning to replace or were you able to replace with the awning extended…. I’m thinking not but thought I would ask given it is a gear mechanism versus the standard type
|
I had already retracted it and had it zip tied in place. Retracting it was a real pain. Took three of us and tall ladders.
|
|
|
09-23-2022, 01:08 PM
|
#8
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
Quote:
Originally Posted by seminolecoop
I have same issue, 1 bad motor and one starting to slow down. Can't find a replacement in stock anywhere.
|
Try https://pantherrvproducts.com/, that is where I found mine
|
|
|
09-23-2022, 01:59 PM
|
#9
|
Established Member
Join Date: May 2020
Location: Green Cove Springs
Posts: 13
M.O.C. #26221
|
Thanks again
Yes tried that site and they are also out of stock on this part…..3317084.000u and the OEM part 3316605.017
|
|
|
09-23-2022, 03:34 PM
|
#10
|
Established Member
Join Date: May 2020
Location: Carleton
Posts: 23
M.O.C. #26237
|
I would email them, they responded and then found one for me even though their site said out of stock.
|
|
|
09-23-2022, 05:38 PM
|
#11
|
Established Member
Join Date: May 2020
Location: Green Cove Springs
Posts: 13
M.O.C. #26221
|
Good to know
May have found one via the mobile service tech friend of a friend and will know tomorrow…. Sadly I will pay 1.5x web prices but at least I will have one
Thanks again
May also call to have a spare as we have 2 on our rv
|
|
|
10-31-2022, 01:18 PM
|
#12
|
Established Member
Join Date: Aug 2022
Location: Orlando
Posts: 34
M.O.C. #31426
|
Awning motors
Looking for a replacement motor for my 2021 3761 FL. Any idea which replacement motor I would need? Thanks.
__________________
Paul & Julie Plaugher
2021 Montana Legacy 3761FL
|
|
|
01-03-2023, 05:39 PM
|
#13
|
Montana Fan
Join Date: Oct 2014
Location: Fishers
Posts: 145
M.O.C. #15824
|
Thanks as I found this thread in the archives.
|
|
|
07-14-2023, 01:01 PM
|
#14
|
Seasoned Camper
Join Date: Aug 2015
Location: Sharpsburg
Posts: 95
M.O.C. #17756
|
Anyone know if replacement gears and/or parts are available for this motor? Just replaced mine and would like to rebuild this one so I have an extra motor for the next event.
|
|
|
07-14-2023, 03:13 PM
|
#15
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,464
M.O.C. #21044
|
I hit that link in post #8 above and it said "out of stock".
Copied the description and put in Amazon and all of this came up.
I don't know that these are the correct part - but start your search on Amazon.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
07-14-2023, 03:49 PM
|
#16
|
Established Member
Join Date: May 2020
Location: Green Cove Springs
Posts: 13
M.O.C. #26221
|
I don’t as not able to find replacement parts but in taking apart the motor carefully I noted the gears had become misaligned… so I realigned so the spindle would move correctly and repacked with lots a grease… works great again
|
|
|
07-14-2023, 05:30 PM
|
#17
|
Montana Fan
Join Date: Oct 2014
Location: Fishers
Posts: 145
M.O.C. #15824
|
I had an issue while in Texas this past January. The problem for me was not the motor but the plastic gear the motor turned. I couldn’t find or buy that part. Had to buy the whole assembly. I used Panther RV Products.
Here was the info and cost.
Dometic™ 3317084.000U OEM RV 9200 Awning Motor Drive - Black
3317084.000U 1 $300.00 USD $300.00 USD
Subtotal: $300.00 USD
Shipping: $15.64 USD
Tax: $0.00 USD
Grand Total: $315.64 USD
Payment method:: Visa, Master, Discover Card, American Express
Panther RV Products
|
|
|
09-01-2023, 02:13 PM
|
#18
|
New Member
Join Date: Sep 2022
Location: Bloomington
Posts: 9
M.O.C. #31728
|
We are going on our 2nd Dometic awning motor. The plastic gear on the metal drive shaft stripped on the 1st one less than 6 months of purchase of our new 2022 Montana. Motor runs but doesn't move the awning in our out. The 2nd motor lasted almost 1 year & we're working on getting a replacement. Why on earth would a plastic gear be used with the metal shaft? It's just not holding up.
As JMGJR said in #6, it was a real pain getting it rolled in to zip tie it for travel both times.
|
|
|
09-20-2023, 03:23 PM
|
#19
|
Montana Fan
Join Date: May 2019
Location: Mesa
Posts: 134
M.O.C. #24052
|
I just had what I think is the same problem while boondocking. We needed to run dump out black tank and the awning wouldn’t retract. I could hear a clicking sound but nothing moved. I got out the manual and did as it said but I couldn’t get it to manually roll in. I ended up having to take the arms off the ends and lower it to the ground. Quite a feet for just the wife and I. Now I have to figure out how to get it home. Maybe some place can repair it - new motor and awning material but I’m thinking I need to replace the whole thing now. Does anyone have any recommendations of a model or brand I should replace it with?
__________________
Rod & BJ
2019 3811MS , 2020 GMC 3500 Dually Denali Duramax, Anderson hitch.
Mesa, AZ
|
|
|
01-04-2024, 03:44 PM
|
#20
|
New Member
Join Date: Jan 2024
Location: Roanoke
Posts: 3
M.O.C. #33798
|
I know this thread is older but here goes. I have a 2021 3121RL with the same issue with the same 9200 awning motor. I was able to get a replacement from Keystone through my extended warranty plan after little help from Dometic. I decided to do a repair on the one that failed so I have a backup. It did appear to me that the gear was molded to the shaft around a serrated area and a hole in the shaft which the glass filled nylon flowed. This is the point of failure, motor drives the gear but it just slips on the shaft after it fails. My guess is part of the failure comes from retracting the awning and once it touches the side of the camper, if you continue to hold the retract button it puts additional strain and torque on the joint, weakens it and eventually fails. There is no torque limiter or slip clutch to protect it. In my case it didn’t even blow the fuse.
After seeing where some others had attempted to repair over on another Forum, I decided to make a new flanged shaft and modify the gear to marry the two together. I bored out one side of the gear just deep enough to remove the ribs and hub. Also bored the center hole to 10mm. Added holes for the rivets. The new shaft is a replica of the old with a flange integrated into the shaft-all one piece. It also has holes to accept the rivets. The head of the rivet only protrudes slightly but there is a flange bronze bushing in the gear housing the shaft goes into that provides the clearance needed. It went together quite nicely however I have only bench tested this since I put a new motor on the camper and will use this as a backup. I had a local machine shop make up the shaft and modify the gear for me. Fortunately I know the owner so he gave me a break on the cost. I feel that this design is stronger than the original, time will tell…If this is something you are interested in doing, and have access to a machinist, I have pdf drawings of the parts made and more photos.
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|