 |
05-15-2013, 01:15 PM
|
#1
|
|
Established Member
Join Date: Mar 2013
Location: Aloha
Posts: 13
M.O.C. #13310
|
Filling fresh water tank
Hello, I have a 2005 2980RL that I just bought. I have trouble filling the water tank. When filling the tank, it will allow water in for a while then the water gurgles out the spout as if the tank is full. When I checked the guage I saw it was only a 1/4 full so I pulled the water hose out and air and water shot out of the tank. This was repeated 4 times until I finaaly got the tank full. My old trailer didnt do this so I am wondering what is going on?
|
|
|
|
05-15-2013, 01:42 PM
|
#2
|
|
Montana Master
Join Date: Mar 2013
Location: Hanover
Posts: 1,471
M.O.C. #13325
|
Believe your vent tube may be blocked. Should be a small screened hole next to the fill one. Try prying the screen off and probing it (gently) with something like a single piece of stranded electrical wire (you could separate a length of extension cord type of twin lead). If you use a coat hanger, that may be too stiff and damage the tubing.
__________________
|
|
|
|
|
05-15-2013, 04:15 PM
|
#3
|
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Sometimes the vent tube is simply kinked ... I think there is a small wedge covered with carpet near the street side rear inner wall that can be removed. You can see the fill hose as well as the vent under it.
|
|
|
|
|
05-15-2013, 05:08 PM
|
#4
|
|
Montana Master
Join Date: Oct 2012
Location: Chilliwack
Posts: 1,520
M.O.C. #12935
|
The condition you describe is often a result of the hose you are using to fill the tank being too large and the air cannot escape the tank as quick as the water is going in. I have taken a 5 or 6 ft 1/2" hose and cut the male end off to use as a filler hose, I have never had that problem since.
I would also not trust the electronic level indicators on any of the tanks, they are just not accurate, especially after they have been used for a while.
|
|
|
|
|
05-16-2013, 02:05 AM
|
#5
|
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Quote:
quote:Originally posted by Irlpguy
The condition you describe is often a result of the hose you are using to fill the tank being too large and the air cannot escape the tank as quick as the water is going in. I have taken a 5 or 6 ft 1/2" hose and cut the male end off to use as a filler hose, I have never had that problem since.
I would also not trust the electronic level indicators on any of the tanks, they are just not accurate, especially after they have been used for a while.
|
Exactly what I was going to recommend!
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
|
|
05-17-2013, 08:42 AM
|
#6
|
|
Established Member
Join Date: Mar 2013
Location: Aloha
Posts: 13
M.O.C. #13310
|
Thank you for the info!
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 06:43 AM.
Linear Mode
