 |
03-21-2016, 08:02 PM
|
#1
|
|
Montana Master
Join Date: Dec 2010
Location: Anytown
Posts: 609
M.O.C. #10966
|
Anyone replace the underbelly material?
Mine has some gaps and some damage from hydraulic fluid leak and also some water damage.
I just want to replace the whole thing and may do some insulating upgrades while I have it open.
Where is a good place to get the material? Or, if anyone has found a better material?
__________________
2011 Montana 3580RL with a Reese 20k GooseBox w/offset B&W ball, Sailuns, RoadMaster shocks, Splendide stacked washer/dryer, some other stuff...
2015 Ram 3500 DRW Laramie Megacab, Aisin w/3.73s, 255/80 17 Toyos A/T III, rear auto level, 40 gal. fuel/tool combo box, some Banks mods...
|
|
|
|
03-22-2016, 01:45 AM
|
#2
|
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
It seems I have read that it can be bought at HD or Lowes in 4 x 8 sheets but not in one length like installed at factory.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
|
|
03-22-2016, 05:04 AM
|
#3
|
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
When I was working on my failed galley grey tank and then adding my Iseries external tank monitor system, I cut the back portion of my correplast into two sections to make life easier. If you clean the material with isopropyl alcohol near the cut, you can reconnect with gorilla tape. After a trip from wintering in sw florida to spending six months in new mexico, arizona and then driving back to florida...the tape hasn't budged. Individual 4x8 sheets would be real handy and if I ever go that route, I will allow the forward panel to slightly overlap the next panel for airflow and water concerns and use screws and flat bar stock to keep the joint closed...although I see no reason why gorilla tape won't function long term. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
|
|
03-22-2016, 05:52 AM
|
#4
|
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
Yep they sell that stuff at Home Depot, Lowe's and also most local Hardware stores,Ace etc.....
__________________
[
|
|
|
|
|
03-22-2016, 03:48 PM
|
#5
|
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
You can also get it from most sign shops.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
|
|
03-22-2016, 06:20 PM
|
#6
|
|
Montana Master
Join Date: Dec 2010
Location: Anytown
Posts: 609
M.O.C. #10966
|
Since my initial post I did find the links to coroplast material. Thinking of my options for additional insulation as long as I am doing this... I agree that doing it in sections might be useful for future repairs etc. Thanks for the feedback!
__________________
2011 Montana 3580RL with a Reese 20k GooseBox w/offset B&W ball, Sailuns, RoadMaster shocks, Splendide stacked washer/dryer, some other stuff...
2015 Ram 3500 DRW Laramie Megacab, Aisin w/3.73s, 255/80 17 Toyos A/T III, rear auto level, 40 gal. fuel/tool combo box, some Banks mods...
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
