Wheel bearings and seals part numbers

[artfuldodger]

I want to repack all bearings on my Monty so I,ll need seals too for the inner bearings. I have 8000# Morryde Independent Suspension and disk brakes by Dexter. My original invoice shows the Timken inner and outer bearing part numbers but is not showing the seal part numbers but says they are 2.25 ". The wheel bearings are 25580 and 02475. Also, where can the seals be purchased?

[mlh]

Any bearing store should have them or can get them in a day or two.
Lynwood

[Daryles]

I like the Timken inner bearing seal better than the Dexter ones. They are substantially better.

Timken bearing seal
Timken 412920 Seal https://www.amazon.com/dp/B001544TIE...p_mob_ap_share

For the 7,000 Dexter axle with the 12" X 2" brake drum assembly, and E-Z Lube design, the parts are:

Dexter Manual pg 80.
Inner bearing- 25580
Inner race- 25520
Outer bearing- 14125A
Outer race- 14276
Wheel seal Dexter # 010-036-00, also known as 10-36, 3.376" OD X 2.25" ID double lip for E-Z lube
K71-305-00
National # 412920

[LeftOverParts]

Amazon, your local trailer shop, RV supply, Camping World. Here's a snip from a Dexter conventional axle manual that shows alternates for 10-36 used with the inner/outer bearing numbers mentioned.