 |
05-03-2018, 09:48 PM
|
#1
|
|
Established Member
Join Date: Jan 2018
Location: Murrells inlet
Posts: 23
M.O.C. #21116
|
Q20
Put a Curt q20 in the bed.Will the middle height setting be ok for my 13'4" montana
|
|
|
|
05-04-2018, 06:50 AM
|
#2
|
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Adding a signature with make and model of Montana and truck would be helpful in having questions properly answered.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
|
|
05-04-2018, 07:42 AM
|
#3
|
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I'd start with that ... you'll then have to hook up and see where your setup sits. There's no "catch all" hole location as each rig and truck sits differently. That's what the adjustment holes are for on both your Q20 hitch and pin box. I as many of us have the Q20 ... you'll like it.
|
|
|
|
|
05-04-2018, 08:12 AM
|
#4
|
|
Established Member
Join Date: Jan 2018
Location: Murrells inlet
Posts: 23
M.O.C. #21116
|
Truck and model
Thanks diesel guy and webefulltime...
Truck is 2018 Ram 2500 and 3721rl is the model
|
|
|
|
|
05-04-2018, 01:25 PM
|
#5
|
|
Montana Master
Join Date: Sep 2014
Location: Full Timer In Naples, Florida
Posts: 1,049
M.O.C. #15731
|
Do you have the puck system?
__________________
2017, 3500 Ram Big Horn, 4x4, Crew Cab, DRW, Aisin Transmission, 4:10. Curt Q20, 2014 Mountaineer 331 RLT, Sailun's on the rv and truck.
|
|
|
|
|
05-04-2018, 04:32 PM
|
#6
|
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Quote:
Originally Posted by dieselguy
I'd start with that ... you'll then have to hook up and see where your setup sits. There's no "catch all" hole location as each rig and truck sits differently. That's what the adjustment holes are for on both your Q20 hitch and pin box. I as many of us have the Q20 ... you'll like it.
|
I agree with this. I have my Q24 set at the highest point but my truck sits low being a 4 x 2. Hook it up and see what you've got and adjust if necessary.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
|
|
05-05-2018, 05:44 AM
|
#7
|
|
Established Member
Join Date: Jan 2018
Location: Murrells inlet
Posts: 23
M.O.C. #21116
|
Thanks Eagleback
Quote:
Originally Posted by Eagleback
Do you have the puck system?
|
No sir
I have rail system...standard installation.
|
|
|
|
|
05-07-2018, 05:48 AM
|
#8
|
|
Montana Master
Join Date: Sep 2014
Location: Full Timer In Naples, Florida
Posts: 1,049
M.O.C. #15731
|
Quote:
Originally Posted by Dennis and Susan Daley
No sir
I have rail system...standard installation.
|
Even though i have the 3500 the bed rails are the same height between the 2500 and 3500, As my neighbor has a 2500 with a curt Q20 and when i owned my 2013 with standard rails both of us use used the top holes. The puck system in my 2017 the legs sit high and i now use the middle holes. you might have to move yours around because no two setups are the same but i would use the top holes first and that will give you around 6 inches between the fiver and the rails.
__________________
2017, 3500 Ram Big Horn, 4x4, Crew Cab, DRW, Aisin Transmission, 4:10. Curt Q20, 2014 Mountaineer 331 RLT, Sailun's on the rv and truck.
|
|
|
|
|
05-18-2018, 06:41 PM
|
#9
|
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
|
There is only one way to find the answer to your ?. You have to hook up your rig to your truck (on level ground) and see how level the camper rides. Like stated, I would set the hitch in its middle position at first and adjust it or the pin box up or down so the camper tows as level as possible.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
