On ours, the propane pipe runs front to back, just past the edge of the aluminum clading that runs along the bottom. The pipe was clamped through the cloroplast into the underside. I was able to just unbol the clamp from the underside, then unbolt/undo the coroplast then slide the coroplast out from under the pipe. You will probably have to remove the entire section of coroplast. If not, it's still probably easier to just remove the entire section rather than fight with it while you're trying to work on the valves.
__________________
Dave in AZ
2008 Montana 3400RL
2008 Dodge Ram 3500 Diesel Dually
|