I would look at the retract manifold, the one where the black retract hydraulic hoses go to. There should be a valve which should open when any retract is activated. I had the electrical connection on the valve oxidize which resulted in the no retract scenario. Pull the connects off one at a time and clean the lugs on the valve and inside the electrical connectors by any means possible. Then try retract again to see if you solved your issue. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|