Hitch & Pin Head Maintence

[DadsHemi]

Did some more maintenance today in preparation for out tip to Ca, re-torqued the pin head bolts because I found a few that were loose. Cleaned and lubed the pin receiver and put lube on the pin, checked the torque on the four puck bolts and all the other bolts on the receiver.

[daneboy]

Sounds like you have things under control. Do you use a teflon disc? If you have a short bed hitch like a Pull Right be sure to lube the rails & movable parts with WD-40. I use a little teflon grease on the 5th wheel table as there is no room for a teflon disc.

Happy Travels,
Jerry

[DadsHemi]

Originally Posted by daneboy

Sounds like you have things under control. Do you use a teflon disc? If you have a short bed hitch like a Pull Right be sure to lube the rails & movable parts with WD-40. I use a little teflon grease on the 5th wheel table as there is no room for a teflon disc.

Happy Travels,
Jerry

I use a drylube on the rails and my Reese grease on the table.