Fine end to a wet night

[Home away from home]

Hello I need a little help at the moment I have a 2013 3100rl we are out on the road in the upper peninsula of Michigan. Tonight (of corse) the fersh water inl
et decided to let go where the hose fastens in the wet bay. What fitting have you used to replace it ? Ours has r&b stamped on it.i believe this is a Jr product's fitting what have you used locally to replace it with


Thanks
Bob and liz

[1retired06]

I picked up a brass one from a local rv dealership.

[scottz]

I had the same issue a few years ago. Replace all your inlet fittings with ones that have a brass insert; the all plastic ones are junk. I also have quick connect fittings so I do not have to repeatedly screw a hose off/on.

https://www.amazon.com/dp/B017MONLP2...9kZXRhaWw&th=1

[Home away from home]

Thanks to all that answered to this post you were more helpful than you will ever know.
What I ended up doing for the moment as over 2 hrs to any dealer .I swapped the freeze guard fitting after washing it well and the city water inlet because check valve was still intact.worked like a charm.when we return home I plan on replacing all the fitting with the boss one as suggested
Bob and liz

[Home away from home]

Brass ones