Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 09-05-2010, 06:46 AM   #1
Bill and Ann
Montana Master
 
Join Date: May 2004
Location: Napanee
Posts: 3,440
M.O.C. #1493
8000 lb. axles - believe it or not

I am currently in the process of having new Equalizers/wet bolts/brakes being done on my unit because I had an equalizer break off. This is after close to 50,000 pulling miles. When the mechanic was ordering the parts he asked me what weight my axles are and I said 6,000 lb. as I thought only the newer units had the 7,000 lb. axles. The upgraded rubber equalizers come in either 6,000 or 8,000 lb. sizes. I asked about putting the heavier equalizers on and he told me that they wouldn't fit as they are ordered according to the distance between the axles. Either 33" or 35". He ordered the 6,000 lb. 33" equalizers. They wouldn't fit. He went out and measured the distance between the axles on the side that wasn't broken and the distance is 35", therefore requiring the 8,000 lb. axles equalizer. I mentioned that I was sure that it was stamped 6,000 lb. and he said if it was, then it was stamped wrong. I imagine this will start a thread going. Believe it or not.
Bill and Ann is offline   Reply With Quote
Old 09-05-2010, 07:24 AM   #2
8.1al
Montana Master
 
Join Date: Jun 2004
Location: Benson
Posts: 3,096
M.O.C. #1658
I would think that just because equalizer says 8,000 doesn't mean that the axles are. You can verify the axle rating by examining what is stamped on the axle
8.1al is offline   Reply With Quote
Old 09-05-2010, 10:27 AM   #3
blarkman
Montana Fan
 
Join Date: Aug 2004
Location: lebanon
Posts: 466
M.O.C. #1977
I have an 06 3000RK with 5200# axles and using a yard stick they measure 35" between axles and I don't think they stamp them wrong
IMHO
blarkman is offline   Reply With Quote
Old 09-05-2010, 02:46 PM   #4
Illini Trekker
Montana Master
 
Join Date: Dec 2004
Location: Newton
Posts: 978
M.O.C. #2733
Same here when I ordered wet bolt kit I ordered by distance and it was 35 inches. The axles are standed 5200 also.
Illini Trekker is offline   Reply With Quote
Old 09-05-2010, 05:46 PM   #5
8e3k0
Montana Master
 
Join Date: Apr 2009
Location: Ardrossan
Posts: 718
M.O.C. #9261
All axles have a plate or are stamped with a load rating ( center of tube). This is mandatory for the U.S. and Canada. 8000 lb axles are not very common; 5200, 6000, and 7000 are. As ratings increase the spindle and wheel will not meet the higher ratings. That's why they go to duallys. Those are normally 10,000 per axle.
8e3k0 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
upgrade to 8000 pound axles? mazboy Additions & Improvements 5 07-12-2015 03:09 AM
axles simonne Montana Problems, Problem Solving & Technical Help 6 08-09-2011 02:36 PM
Closing in on 8000! CountryGuy Sitting around the Campfire 2 04-21-2005 04:09 PM
Axles jh1802 General Discussions about our Montanas 11 01-11-2005 01:34 PM
How many axles do you have??? Glenn and Lorraine Sitting around the Campfire 11 12-31-2004 09:55 AM

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 09:11 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.