PUMP PRESSURE

[nickeaton]

I HAVE A 2008 2955 MONTANA AND AM DISAPPOINTED IN THE WATER PRESSURE FROM THE PUMP. HAS ANYONE ELSE HAD THIS SAME PROBLEM?

[wjwheeler]

I bought mine used and it has a Flojet 03526-144 that supplies adequate pressure but it is noisy.

[WeBeFulltime]

Mine is OK but if I had that issue I would first look for a clogged filter or screen close to the pump.

[Rondo]

I'm with Dave! I'd be looking at the filter screen on the intake of the pump. If it is not full of junk, you may have a gasket leaking and letting in some air which will reduce the pressure.

[racerjoe]

There also should be a pressure adjustment screw on the side of the pump. Just may be set to low.

[HOOK]

On our 14 , I have cleaned wood shavings from our kitchen diffuser twice already. Could be the strainer at your pump.

[DQDick]

The most frequent cause of clogged screens is bacterial material coming from the fresh water tank. If it is a screen problem be sure and sanitize your system. Even those of us who full time should sanitize twice a year.

[hookman]

The pump in ours was a 30 psi pump. When I put in the RO system I installed a 55 psi pump. It is not as noisy and maintains a better pressure.