Aqua Magic III? or IV toilet

[CmdrDewey]

Can anybody tell me how to get one apart with out removing it? The website is useless.It shows the mechanism cover as a separate part but it isn't on mine. My problem is the water fill is very, very weak. I suspect a clogged valve because it happened a few weeks ago and cleared up shortly. Not this time.

Thanks for any help

[ols1932]

The only way I could fix my IV was to remove it. When I saw what had to be done I decided to buy a new one.

Orv

[CmdrDewey]

Thanks Orv. That is about what I figured. I appreciate the comeback.

[8.1al]

David,
Take a mirror and look up under the rim of the toilet bowl at the back. you will see the nozzle that sends water around the rim of the bowl. If any debris has passed through your system it may be caught here. Try running a piece of wire through here to clear that out.

[bigmurf]

Pull the water line loose on the back of the unit (on your knees and hug the toilet). Take a mirror and look inside the fitting on the toilet to see if there is some junk in there. If you need to work on it I found it was better to remove the entire unit. This is what I done to mind. If you find junk I can tell you a couple of things that I done. Good luck.