Spring time in Montana

[Buck1941]

Just finished packing the wheel bearings. Also added a wet bolt kit and new rubber isolator a for the Moreryde axles. I took out the anti-siphon valve for the black tank flush and took my rear stabilizers down for repair and cleaning. My stabilizers were bent.
The wife cleaned all the the carpets. Today I have the belly pan off the front because the black flush fitting on the tank was cross threaded and leaking. I just got this Montana and want my long trip to be a enjoyable one. What's next?

[jimandlaurie]

Maybe get hooked up and go? Enjoy!!

[WeBeFulltime]

Yep, a shake-down cruise will tell you if you missed anything.

[DQDick]

Don't forget to sanitize your fresh water tank. No telling what's been left or might be growing down there. A cup of bleach, fill it and let sit.

[Buck1941]

We'll I thought I was close to being ready to get on the road but no dice. Just replacement the black and gray water knife valves and cables with the valtterra setup. Just installed GY G614s with a matching spare. Wally World ordered them in for me. That will give me piece of mind while on the road. Currently I am building a bike rack that will fit on my pin box. It will bolt on to the original morryde pin box with no drilling. Today I found out that my King Dome satellite System was fried. It seems that when I pulled it lid off the dish, it was full of water. So my dish and all of the electronic on the roof are toast. It's a good thing that the seller is working with me on that. It' seem like lots of headaches but it's part of owning a Montana. I am really enjoying working on it. It's really nice to get good information from experienced folks on the MOC forum. Thanks again !!!!