|
Haven't had the problem, but if you look at the piece that was in your hand...it was probably aluminum and split open where the threads are. If you cut a small flap in the bottom material, you will be able to see where the rod screws onto the valve. You should be able to figure out how to do a workaround or fix. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
Hybrid Mode
