Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > Tow Vehicles & Towing
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 03-17-2018, 07:06 PM   #21
mhs4771
Montana Master
 
mhs4771's Avatar
 
Join Date: Dec 2009
Location: Sebring
Posts: 2,164
M.O.C. #9969
Outlaw, guess I wasn't clear. What I mean by moving the hitch forward to center over the axle it returned the front axle back to the solo front axle weight, putting the several hundred pounds back on the front, or at a no loss or gain from the TV's solo weight.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, GY G114 17.5 Tires.
mhs4771 is offline   Reply With Quote
Old 03-18-2018, 08:09 AM   #22
The Bone
Montana Fan
 
Join Date: Jun 2015
Location: Livermore
Posts: 152
M.O.C. #17521
Moving the hitch a couple inches back from center of axle will not change the weight on the front axle much. There is a reason that B&W put that adjustment in there.
So you can make adjustments. I have mine back one hole from as far forward as I could go. Still have one more hole back I could go.
The Bone is offline   Reply With Quote
Old 03-18-2018, 08:48 AM   #23
masterdrago
Montana Fan
 
Join Date: Sep 2017
Location: Willis
Posts: 306
M.O.C. #20587
Ours is full forward, lowest position. RV is still nose high. I set it this way based on advice from another with the same rig (truck/hitch). There is still much clearance between truck and RV.
__________________
2018 Montana 3791RD
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600
masterdrago is offline   Reply With Quote
Old 03-21-2018, 05:48 AM   #24
rollingdownthehighway
Established Member
 
Join Date: Jul 2017
Location: Torrington
Posts: 44
M.O.C. #20273
What did you end up going with? I just got my inch yesterday and installed the base (waiting for the plate to come). I installed the arms in the second hole and over the axle. I'll make changes once I pick up our rig.
__________________
Mike
2016 Chevy CC DRW Duramax
2018 Montana 3700LK (on order)
rollingdownthehighway is offline   Reply With Quote
Old 03-31-2018, 08:31 PM   #25
hrlyrdr
Established Member
 
Join Date: Jul 2017
Location: Maryville
Posts: 33
M.O.C. #20110
I am trying to sort mine out now also. New truck, 18 Chevy dually 4x4, trailer is 3625RE Big Sky. I bought a B&W that was in the rear and lowest position. I hooked up the camper today for the first time and it looked good, about 6 inches to top of retrax rail. Pulled up the road and made a sharp left turn and the pin box came too close to the bed for me. Came back and raised the hitch to highest position and of course the trailer is nose high. My pin box has one more hole to lower it but I'm thinking the trailer is going to be too close if I do. These dang trucks are just to high.
hrlyrdr is offline   Reply With Quote
Old 03-31-2018, 09:08 PM   #26
OutlawPilot
Montana Fan
 
OutlawPilot's Avatar
 
Join Date: Oct 2017
Location: Toronto
Posts: 139
M.O.C. #20672
There are 3 hitch heights for the GM-specific Companion. If lowest was too low and highest is too high then it seems middle should work. That's where I have mine in preparation for our first tow coming this week.
__________________
2017 GMC Sierra Denali HD CC LB DRW 4x4 3.73/ AirLift Wireless Air
2018 Montana High Country 381TH / Companion Hitch / 5th AF Pinbox

The Aviators TV Website | Facebook Page | YouTube Channel
Streaming Episodes (iTunes, Google Play, Amazon)
OutlawPilot is offline   Reply With Quote
Old 03-31-2018, 09:22 PM   #27
carl n susan
Site Team
 
carl n susan's Avatar
 
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 2,894
M.O.C. #4831
Quote:
Originally Posted by hrlyrdr View Post
<snip>
...Pulled up the road and made a sharp left turn and the pin box came too close to the bed for me. ..
</snip>
Welcome to the world of the long pin box and tonneau cover rails. You might get the pin box high enough to clear the bed side in a tight turn but you likely will be way too high in the front.

What to do? Don't do tight turns is one answer. The other depends on what pin you have. If it is the Mor-Ryde, many have clipped the back edge of the frame the pin box is attached to on a 45 degree slant. I don't know if that will work for whatever pin box they install today.

Here are some posts from others with the problem.

http://www.montanaowners.com/forums/...ad.php?t=69642
http://www.montanaowners.com/forums/...ad.php?t=48237

The last resort is to buy another pin box where the distance from the pin to the back edge of the frame is less than the width of the bed (including the tonneau cover rails).
__________________
Carl (n Susan) Youngren
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB

carl n susan is offline   Reply With Quote
Old 03-31-2018, 10:51 PM   #28
CaptnJohn
Montana Master
 
Join Date: May 2017
Location: Eastern NC
Posts: 821
M.O.C. #19865
I was thinking of a new MorRide box at the Rally, now I think to leave well enough alone. The Lippert 1116 is short and one a little longer and with some cushion would have been nice.
__________________
John & Patty
2017 Montana HC 370BR
2016 Lariat F350 4X4
CaptnJohn is offline   Reply With Quote
Old 04-01-2018, 07:11 AM   #29
hrlyrdr
Established Member
 
Join Date: Jul 2017
Location: Maryville
Posts: 33
M.O.C. #20110
Thanks for the info guys. I am thinking I should have styed with plan A.... FLAT BED 2 wheel drive. lol I don't see a way to ever be level while towing but I dang sure will keep trying. Happy Easter to all.
hrlyrdr is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.