Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC on M.A.R.S. > Additions & Improvements
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-15-2004, 02:31 AM   #1
Montana_655
Montana Fan
 
Join Date: Nov 2003
Location:
Posts: 163
M.O.C. #655
Cabinet door clip adjustments

On the inside of the cabinet doors there is the male pin which goes into the female rollers on the frame of cabinets. On one of our doors these have become lose in that the door isn't held closed tight (very little resistence) and opens during transit. Are these adjustable or do you just replace them? TIA..
Montana_655 is offline   Reply With Quote
Old 07-15-2004, 03:45 AM   #2
sreigle
Montana Master
 
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
I found that for the doors to stay closed not only do they need to be tight, the male pin has to be exactly aligned with the female side. If it's a little off, you don't have the springs on both sides holding it in place very well. Of course, heavy items inside could still push the doors open but they won't come open by themselves.

The latches have screws that can be tightened. They also have adjusting slots so you can move them side to side a little bit. On one of ours I straightened the bent male side with needle nose pliers. Other than that they'd probably have to be replaced, I would think.
sreigle is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Softer cabinet door tooth ferry What I'd like to say if... 7 11-05-2016 04:37 PM
Fuse Panel Door clip broke MrRobinGrimes Additions & Improvements 1 02-19-2015 01:37 PM
Sliding mirror door clip. Lee F. Repairs & Service 6 04-06-2011 03:12 AM
Plastic closet door clip bulbrich Maintenance 5 09-16-2009 09:12 PM
Mirror -cabinet door Ronnelly What I'd like to say if... 3 11-08-2005 07:04 AM

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:30 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.