|
11-03-2016, 09:17 AM
|
#1
|
Established Member
Join Date: Aug 2015
Location: San Tan Valley
Posts: 15
M.O.C. #17718
|
Toilet trouble
I have a Sealand toilet in my 2010 34.5 Hickory edition. The toilet no longer holds water so sometime get odors. Is this repairable?
|
|
|
11-03-2016, 10:15 AM
|
#2
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Sealands were good toilets and you should be able to get replacement parts for it. If you can't, just get the dometic 310 or 320 models. You will love them. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
11-03-2016, 10:46 AM
|
#3
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
Pour a little Blus Dawn on the ball valve
|
|
|
11-03-2016, 11:12 AM
|
#4
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,168
M.O.C. #6433
|
I had the same problem with my Sealand after 3-4 years. Replaced the rubber seal around the ball. Had to disconnect water line, take the top section of the toilet off (remove or loosen metal band around middle area), remove the old seal, clean the area, install the new seal, and put top section back on. Old seal was not well centered and may have been the problem. So I made sure to center the new seal. Not a bad job. No problem since, and that was a number of years ago.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
11-03-2016, 01:00 PM
|
#5
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Simple gasket replacement
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
12-21-2016, 04:11 AM
|
#6
|
New Member
Join Date: Dec 2016
Location: Knoxville
Posts: 3
M.O.C. #19304
|
If it already has a new seal try and lubricate it with grease.. we had to work the pedal quite a bit before it would hold water and the ball valve close was off. Had to take it apart and put back together with some grease.. also apply grease under the seal too.. we had the same issue in our other camper. no problems so far
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|