Run wire from inside to roof, without drilling
Hello! I have a 2016 Montana, 3710FL. It has what appears to me to be an access point on the roof in both the front and rear of the rig, roughly centered left to right, and about 20” back from the front and rear caps of the rig. Both have a 4-5” plastic cap that screws off. Inside there is a plastic screen and under that I see insulation and what appears to be a ‘passageway’. I am assuming/hoping these are intended to be access points to run a wire up from the rig to the roof. I am trying to run a cell signal booster antenna wire up to the roof without drilling a new hole.
Finally the question - does anyone know how to access that ‘passageway’ from inside the rig so I can run a wire through it and up to the roof?
|