Awnings light fuse location

[Milijose@embarqmail.com]

Is any body here know where is the fuse for the awning light.i can’t find it
Is a Montana 2018 3921FB the back light of the awning work but the one in the front no power

[Carl n Susan]

It really helps the group if you tell us the Year, Make, and Model of your Montana. Adding that info to your Signature is the best way to ensure it is always there in a Post.

It appears you have a 2018 Montana 3921FB.

[Milijose@embarqmail.com]

Originally Posted by Carl n Susan

It really helps the group if you tell us the Year, Make, and Model of your Montana. Adding that info to your Signature is the best way to ensure it is always there in a Post.

It appears you have a 2018 Montana 3921FB.

I am so sorry is just get frustrated looking for that fuse is like looking for a treasure Montana 3921 FB 2018

[Milijose@embarqmail.com]

Sorry is just that is crazy looking for tha 3 amps fuse 3921 FB 2018
Thank you

[Carl n Susan]

Search is your friend. Here are some Threads on your problem.
https://www.montanaowners.com/forums...ad.php?t=84759
https://www.montanaowners.com/forums...ad.php?t=86372
https://www.montanaowners.com/forums...ad.php?t=74426

[Mikendebbie]

Milijose - I used the google search “LED awning light fuse”. Carl probably did the same. I read thru the first four results before finding someone with the InCommand Pro Plus panel like you and I have. It seems there are fuses behind the InCommand BCM in the basement. In the post I read - the guy said to remove the 6 screws holding the BCM to the wall, remove it and look. He said the BCM wires have lots of slack to allow it to be pulled out.

If it was me - I would remove the wall panel to the left of the BCM and try to access the fuses from there. I would not trust my skill to remove and replace the BCM and the bundles of wires. My InCommand works fine now - I don’t want to mess with it unless I have to.

The owners manual has a pic/layout of the BCM. The awning light connects are on the lower left side. The BCM diagram numbers the connections and shows the color of the wire. Study the layout before you start digging thru the spaghetti bundle of wires looking for the right wire to trace for a fuse.

Edit: For those of you that do not have InCommand - it seems that the 3 volt fuse is behind your switch panel…so you have to remove the switch panel and look.

[RMcNeal]

Well, Mike beat me to it. I found mine behind the switch panel last year when I had a problem with the awning and light. Turned out to be the connector outside for the awning motor was corroded. Unplugged it and plugged it back in and the awning started working again.

[GeologyTek]

My 2018 3811MS has a 3 amp fuse located behind the inside light switch panel. It is an "inline" fuse holder with a 3 amp standard style atc car fuse. I found it when I removed the switch panel to replace a broken switch.