 |
06-29-2011, 11:14 AM
|
#1
|
|
Montana Master
Join Date: Mar 2007
Location: Bonita Springs
Posts: 1,943
M.O.C. #6977
|
Rims for G614 tires
So how do you know if your rims will take the G614 tires at 110 lbs
I have been under my rig and I see it is stamped Max 3500 lbs but nothing about the PSI in the tires. I have a 2009 with Copper tires on now at 3042 Lbs per tire but if I upgrade , how do I know
sailer
|
|
|
|
06-29-2011, 12:27 PM
|
#2
|
|
Montana Master
Join Date: May 2010
Location: Tampa
Posts: 532
M.O.C. #10378
|
If the rims are stamped 110 PSI, you are good to go. Look on the back side of the rim. Mine are stamped into the aluminum, others say they had a sticker.
|
|
|
|
|
06-29-2011, 02:27 PM
|
#3
|
|
Montana Master
Join Date: Nov 2007
Location: Canon City
Posts: 1,340
M.O.C. #7919
|
sailer,
Like nosticks states some have a sticker. Our 08 had a sticker on each rim. The 10 has the PSI rating cast into the back of a spoke. See the link: PSI Rating
Joe
|
|
|
|
|
06-29-2011, 04:28 PM
|
#4
|
|
Montana Master
Join Date: Feb 2007
Location: Essex
Posts: 1,123
M.O.C. #6880
|
Hi John. Mine are stamped on the back of the rim, 110 lbs.
|
|
|
|
|
06-29-2011, 04:53 PM
|
#5
|
|
Montana Fan
Join Date: Oct 2009
Location: Wilsons
Posts: 404
M.O.C. #9833
|
110 psi cast into spoke on inside of wheel on my 2010 3400
|
|
|
|
|
06-29-2011, 04:54 PM
|
#6
|
|
Montana Master
Join Date: Jan 2009
Location: Centerville
Posts: 1,350
M.O.C. #9051
|
I was told on this forum if they did not have the sticker or 110 psi stamped on them , if they had TR6 on the inside of one spoke they were rated for 110 psi. That was what is on my 2008 3400RL. Some may verify that again.
|
|
|
|
|
06-29-2011, 11:23 PM
|
#7
|
|
Montana Master
Join Date: Mar 2011
Location: Okeechobee
Posts: 2,150
M.O.C. #11206
|
Hi
Weigh your trailer to see what the axel weights are then use the tire inflation chart. The chart indicates we should be running 95 Psi. but we have 25,000 mile at 110 Psi. with no problem. We have the TR6 wheel.
http://www.goodyearrvtires.com/pdfs/rv_inflation.pdf
Phil P
__________________
2009 Montana 3665RE
2009 Duramax 3500 DRW quad cab
personal web page https:// www.sallyscoffees.com
If you get a page not available then remove the "s" after HTTP
|
|
|
|
|
06-30-2011, 08:05 AM
|
#8
|
|
Montana Master
Join Date: May 2005
Location: Fall Creek
Posts: 1,329
M.O.C. #3699
|
My original rims were NOT rated for 110 PSI. Purchased new high pressure rims and metal valve stems gor my g16's, what a GREAT tire.
__________________
Bob and Nancy Kassl Fall Creek, Wisconsin
2015 Montana 3440RL Legacy Edition, G614's, Pressure Pro TPMS, Dish Tailgaters
2016 GMC Sierra Denali 3500 CC SRW, Iridium Metallic, Duramax Allison Transmission
|
|
|
|
|
06-30-2011, 05:48 PM
|
#9
|
|
Montana Master
Join Date: Nov 2004
Location: Oak Harbor
Posts: 1,530
M.O.C. #2471
|
Here is the way it looks on the back of one of my wheels. This information is only stamped on one of the spokes. The other spokes have various other info stamped on them.
r,
Jack
__________________
Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's  ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods.
2021 RAM 3500 Laramie.... "LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.
|
|
|
|
|
07-05-2011, 11:57 AM
|
#10
|
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
John, since yours say 3500 lbs I'm doubtful they're rated for 110 psi. Like Jackel's, ours say 110 psi and 3750 lbs. Ours are the oem rims. I could be wrong, though, about yours.
|
|
|
|
|
07-06-2011, 03:35 AM
|
#11
|
|
Montana Fan
Join Date: Nov 2010
Location: Northwest Tennessee
Posts: 450
M.O.C. #10884
|
Just went through this process in obtaining all metal valve stems for 614 tires. Talked with Tredit Wheel and Tire to determine which rims are on the '11 3400RL. The rim pictures they furnish are on their website. Looking at the website pictures is how we determined the exact rim. Neither Keystone nor Tredit could determine which rim I had without using the pictures. My rims are the TO4, 8 spoke which are stamped 110 PSI on one spoke on the inside along with the max weight which I can't remember.
__________________
2017 Montana 3611
2012 Chevy 2500
|
|
|
|
|
07-06-2011, 03:10 PM
|
#12
|
|
Montana Master
Join Date: Mar 2007
Location: Bonita Springs
Posts: 1,943
M.O.C. #6977
|
My rims have the TR6 on the rims on the back stamped in so they should be good for 110 lbs
sailer
|
|
|
|
|
07-06-2011, 03:36 PM
|
#13
|
|
Montana Master
Join Date: Jan 2009
Location: Centerville
Posts: 1,350
M.O.C. #9051
|
Quote:
quote:Originally posted by sreigle
John, since yours say 3500 lbs I'm doubtful they're rated for 110 psi. Like Jackel's, ours say 110 psi and 3750 lbs. Ours are the oem rims. I could be wrong, though, about yours.
|
Hopefully you are wrong, was told on THIS forum that the TR6 stamped on the back of mine were good for 110 psi., and has the 3500 lb rating. Either way I have been running G614's on them for about 6500 miles with 95 psi in them. No problems. I will never run 110 in them ,there is no need for my weight.
|
|
|
|
|
07-06-2011, 03:47 PM
|
#14
|
|
Montana Master
Join Date: Sep 2006
Location: Casa Grande
Posts: 5,369
M.O.C. #6333
|
John, You need to get in touch with Tredit Tire and Wheel in Elkhart, a Mr. Ball. Tredit removed the official certification on these wheels which means they are NOT certified for 110 psi nor 3750 lbs. Richfaa can give you more info on this.....or you can search for his posts on this subject.....
|
|
|
|
|
07-07-2011, 01:32 PM
|
#15
|
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Phil, did they pull it for all of them? I thought it only had to do with withdrawing it for those to whom they gave stickers to put on the rims. In other words, at one point they said they're all ok for 110 and 3750 and handed out stickers for those whose rims didn't already have the sticker or stamp on them. Later they withdrew that certification. But those rims that had been stamped at the factory and those that had stickers attached at the factory retained the certification.
It is definitely possible I misunderstand and that's why I'm asking the question. Did I misunderstand? Thanks.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
