Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC on M.A.R.S. > Additions & Improvements
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 12-07-2018, 06:30 AM   #1
grumbolt
Established Member
 
Join Date: Sep 2018
Location: Dade City
Posts: 22
M.O.C. #22670
Back up camera / rear observation monitor

well while i have the belly off of my monty repairing the black tank and installing insulation, i might as well make an upgrade or 2....



i wanted a good backup camera / observation camera and i wanted it mounted high enough so that when i am hauling my wifes mobility cart it will see over it as well as see all around the back of my unit.



this turned into a pretty interesting adventure.


my unit has the back cap with the massive rear window so simply popping a hole in the top of the cap and dropping a wire down the middle to the belly pan was not really an option.



what i ended up doing was remove the center and left marker light housings as well as the left turn signal housing to provide limited access.



i used a strong magnet to guide a 3/8 nut tied to a piece of nylon twine to fish the twine around the corners and insulation to get it down to the bottom of the cap at the left rear belly pan.



with this done, i now felt comfortable with drilling a hole in the back cap over the window and installing a water tight cord grip.



i drilled the hole slightly smaller than the 1/2 inch national pipe thread tap, then tapped the fiberglass hole.


i pulled the wire into the hole using the nylon twine installed the cord grip onto the cable and used sealant on the threads and tightened it to the cap.


i was able to find a polar white non metallic box and cover at lowes and drilled out the back of it to accommodate the cord grip, drilled the bottom of the box to allow the camera wires to enter (the box doesnt need to be water proof, as it is isolated from the back cap) and installed it over the cord grip. i will be routing the siamesed cable up to the pin box as well as routing a wire from the marker lights up to just forward of the tires so that i can put a amber marker light shining down just in front of the tires to make night driving easier should the wife ever have to pull the camper.


ill update as things get changed!
happy trails!


edit p.s. dont forget to add sealant around all screws and all light fixtures when you reinstall them, i resealed all of my marker lights that are mounted on the back cap while i was there.
Attached Images
File Type: jpg camera mount.jpg (98.0 KB, 5 views)
grumbolt is offline   Reply With Quote
Old 12-07-2018, 10:47 AM   #2
waynemoore
Montana Master
 
waynemoore's Avatar
 
Join Date: Jul 2010
Location: Lake Havasu City AZ.
Posts: 1,372
M.O.C. #10552
Very nice job. I don't need a cam but I do want to have a marker/turn signals on the sides just in front of the wheels. It would add a safety factor and let people know I am wanting to change lanes or make a turn.
__________________
Wayne and Ann Moore
2015 Ford F-350
2015 Montana 3582RL
Firestone air bags, bed saver.
waynemoore is offline   Reply With Quote
Old 12-08-2018, 04:31 AM   #3
grumbolt
Established Member
 
Join Date: Sep 2018
Location: Dade City
Posts: 22
M.O.C. #22670
i am needing the cam in case the wife ever drives, and it will make positioning much easier when i go to set up, i wont have to worry about running over the darling wifey!



i already have the belly pan off doing other repairs (black tank and insulation, and installing ethernet wiring throughout the unit) so it is only natural to go ahead and wire in the marker lights while everything is out in the open.



i am using led amber marker lights i found at walmart mainly because in the location they are gonna be in, incadescent lamps or even lamps with a socket will eventually be probelmatic.



i also ran wires to both sides (16 gauge speaker wire is plenty thick enough and one wire is marked so that you can tell them apart) for another lighting project i am working on. i will take pictures of that install as well as the switch location once i am finished with it.


thanks, happy trails!
grumbolt is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.