 |
02-11-2019, 03:23 PM
|
#1
|
|
Montana Fan
Join Date: Sep 2016
Location: Omaha
Posts: 104
M.O.C. #19003
|
Hydralic Room Control
We have a 2017 Montana 3661RL with five slide outs. Before I start turning knobs on the Hydralic Control Room, HCR, panel I thought I'd ask a question first. I want to only bring in the reclining chair slide out. We are in close quarters where we are, if I can slide in the slide out I have enough room to was and wax the slide out. The HCR has four knobs labeled DS--DS2--ODS--ODS2. My question is which knob controls which slide out and what direction should I turn the knob. Right now they are in the 12 o'clock position. Any further information on how the HCR operates will be appreciated. Thanks for any input.
|
|
|
|
02-11-2019, 03:44 PM
|
#2
|
|
Montana Fan
Join Date: Jan 2019
Location: TROY
Posts: 133
M.O.C. #23248
|
I do know that DS is "Door Side" and ODS is "Off Door Side"
Which is #2 I cannot help you with, you might have to try one to find out.
Mine are labeled at the top and are "on" when the knob points up towards the name (see attached photo). Mine are labeled "OFF" on the bottom. Rotating the knob to "OFF" disables that slide.
|
|
|
|
|
02-11-2019, 03:47 PM
|
#3
|
|
Montana Master
Join Date: Jan 2018
Location: Thornville
Posts: 546
M.O.C. #21110
|
Im positive it will be trial and error, as Keystone is known for NOT being consitent with their connections and labeling. I would try 1 at a time and make a note of which one it controls.
Im almost certain the knobs should turn clockwise to shut of service to those knobs/slide units. you must turn them until they stop, but DONT force them too tightly.
Please keep this thread updated on findings, as it may and will help others in their issues!
__________________
Darwin & Carla
2018.5 3701LK Montana
2022 3500HD Denali Duramax SRW
|
|
|
|
|
02-11-2019, 03:52 PM
|
#4
|
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
if yours is like our it would be ODS2 if that is the only one you want to move you turn the others off. They are actually valves. So what you want to do is turn them all the way in the off direction.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
|
|
02-11-2019, 04:13 PM
|
#5
|
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
On ours you have to turn the knobs counter clockwise past the on position to release the pressure then turn them to off.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
|
|
02-11-2019, 05:14 PM
|
#6
|
|
Montana Fan
Join Date: Sep 2016
Location: Omaha
Posts: 104
M.O.C. #19003
|
Everyone wins a prize! The knobs do turn CW to "turn off" the slide out and ODS2 knob did control the recliner slide out. DS knob controls the dinette table slide out, DS2 knob controls the TV/entertainment slide out and ODS knob controls the refrigerator slide out. I got lucky, the nomenclature on each knob aligns to the position of each slide out. Thanks for your input, I appreciate it. Be safe out there!
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
