Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 11-14-2019, 03:18 AM   #1
WKN
New Member
 
Join Date: Mar 2017
Location: Craig
Posts: 6
M.O.C. #19550
Supporting Slides

I have a 2017 Montana 3810MS. Iím trying to eliminate some of the movement when we are parked. Iím thinking about using supports on my slide outs to help. Iím just wondering if this will damage my slide outs.
WKN is offline   Reply With Quote
Old 11-14-2019, 04:44 AM   #2
Golfmedik
Montana Master
 
Golfmedik's Avatar
 
Join Date: Apr 2016
Location: Auburn
Posts: 733
M.O.C. #18474
The slides are made not to need the supports. Also, if you have supports under the slide and you have a tire go flat, it can be very expensive as the weight for that side is now transferred to the slide and usually causes a good amount of damage. To alleviate some of the movement, try putting blocks under the hydraulic jacks so they don't extend so far, using X-chocks and some even use a pin box tripod to get all of the shake out. However, if the unit is still supported by some weight on the suspension, it will still move some.
__________________
2016 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, 8k Disc Brakes
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
Golfmedik is offline   Reply With Quote
Old 11-14-2019, 05:27 AM   #3
RMcNeal
Established Member
 
RMcNeal's Avatar
 
Join Date: Oct 2019
Location: Jacksonville
Posts: 24
M.O.C. #25165
Also, take a look at the X-Chocks. They really took out the extra movement in my old TT. Haven't used them on the new 5er though.
https://www.amazon.com/X-Chock-Wheel...s%2C157&sr=8-4
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
RMcNeal is offline   Reply With Quote
Old 11-14-2019, 07:31 AM   #4
Dave W
Montana Master
 
Dave W's Avatar
 
Join Date: Jul 2014
Location: Upstate NY
Posts: 940
M.O.C. #14547
Use of supports will not improve 'jiggle'. As long as you have the tires in contact with the ground, there will be some sidewall flexing and "jiggle" will happen. Also the way any towed trailer is supported/leveled is not really a solid foundation.



I do use supports under the 13 foot long LR slide while we are at our summer seasonal but that is a cable operated slide on a HC and it will sag a bit over time along with temperature.



I would not use supports under a hydraulic or rack and pinion slide though



A flat tire will not allow the unit to list to one side if you have the levelers or rear stabilizers down in the event of a flat tire. Additionally that flat will only sink - maybe - 3 inches in a static condition but the other tire wil keep the unit level.


When we travel, I use two BAL X-Chocks. If at a CG for over 2-3 days will add a spare pair of manual rear stabilizer scissor jacks left over from a long gone TT under the frame about at the entry door location. This will mostly control but never totally eliminate 'jiggle' - a fact of RV life
__________________
Dave W
Traveling with my DW Susan, a couple poodlepups and our 2014 Montana High Country 343RL, being towed by a 6.7 2011 F250 CCLB using a B&W hitch and OEM puck system
Dave W is offline   Reply With Quote
Old 11-14-2019, 07:49 AM   #5
1retired06
Montana Master
 
Join Date: Feb 2012
Location: Lake Gaston
Posts: 7,863
M.O.C. #12156
Yes, slide supports are a risk for slide damage. To eliminate movement in our rigs, I carry blocks I place under each leveler leg to minimize the extension distance of the leg, and have found that helps significantly. Found the pinbox tripod to be of little value.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
1retired06 is offline   Reply With Quote
Old 11-14-2019, 08:00 AM   #6
DQDick
Montana Master
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 16,702
M.O.C. #11455
Agree with Mike. We carry blocks and lower the front after we unhitch before we start auto level. You do have to have it a little front high, but not near as high as it is to unhook. We tow pretty level, but to get the pin out of the hitch on our truck (with automatic air bags) we do have to raise it a lot more than it needs to auto level. I put the blocks under and then lower it to a good start position (you do have to experiment with this) and then hit auto level and walk away.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, MorRyde pin box
2017 3500 Dodge Maxi DRW 4X4, Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, etc.
DQDick is offline   Reply With Quote
Old 11-14-2019, 10:21 AM   #7
richfaa
Montana Master
 
Join Date: Jan 2005
Location: North Ridgeville
Posts: 19,772
M.O.C. #2839
What Mike and DQDick said.
richfaa is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 08:52 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×