Front Landing gear fuse location

[amyottebg]

I have a 2009 Montana 2955RL and I have tried to find the front landing gear 30a fuse but have had no luck. Can someone please describe the location to me so I can spend more time suntanning. Thanks

[Ozz]

I was not aware the 2009 models had the remote module.

[amyottebg]

I think I found the 30 amp inline fuse and changed it. The landing legs and rear stabilizers still do not work. My remote works though, both the front landing and rear stabilizers. What else could it be?

[Recumbent]

There have been recent posts about the ground wire connection failing on the control panel near the hydralic pump area up front for the remote and manual switches. The fix was to rewire the ground wire to the frame of the trailer. There could be a grounding issue when switching from remote to the manual mode. Maybe someone will come along that can describe this abit better than me.

[Carl n Susan]

There are a couple of reasons why the switches don't work but the remote does. Jackel1959 has investigated (fancy word for actually having the problem) and has supplied a couple of solutions. Here are those that I could find.

Resetting the Control Unit
http://www.montanaowners.com/forums/...chTerms=remote
or
http://www.montanaowners.com/forums/...chTerms=remote
or
http://www.lci1.com/LIP/0113.pdf

Moving the Ground to the Chassis
http://www.montanaowners.com/forums/...ad.php?t=46515

Hopefully one of these will be the solution you need.

[bbeezzz]

Did you try by pass the toggle switch to confirm they are ok?

[HOOK]

Our problem was corrected when I removed the connections at the switches and checked all and cleaned contacts after which all was well. Larry