I have a 2017, Montana, 3710 FL. Six slide 5th wheel; three of the slides are hydraulic and have the start stop problem. So after many hours of testing circuitry, changing out circuit breakers, load testing batteries and replacing every ground wire in the system the problems associated with my hydraulics slides stopping and starting came down to one component. Unfortunately the issue lies within the BCM and a single resister located on the primary circuit board. As was explained to me by the ASA Technical Expert, the offending resister has now been changed out on the older boards and replaced with a higher capacity resister. I am fortunate in that ASA have offered to replace the BSM board at no cost, but be prepared to do your homework and have answers that fit the narrative that you have checked every potential problem prior to contacting the ASA customer service team. These people are excellent and are really knowledgeable in all aspects of the BCM and the systems it controls. As soon as the new board is installed I will update my fellow Montana owners to update the results. Cheers
Ken
|