Dura Faucet shower head

[Dontana]

I emailed the company on the "sliding shower head" last summer and here is the reply

Don,

We've since improved this issue you are having, but there is a quick fix you can do. Attached are the installation instructions. The wall covers slide off toward you (with force) and then you can remove the brackets to get to the bar, which then allows you to remove the mechanism. The thing we found that solves this problem is that you can remove and turn the rubber stopper (#5) in the mechanism upside down and put it back in. It will give it a new life and should solve your problem completely.

Gabe Ohms
| Dura Faucet | 19215 SE 34th St., Ste. #106-382 | Camas, WA 98607 | 888.242.5932 ext. 700

Here is the link to the install instructions or do a search on your model if the link doesn't work. Good luck.

https://mail-attachment.googleuserco...24V9TKXi1T4GX8

[CATCRAW]

I could not access the link you provided..... But interested in reading the instructions. Could you check the link and re-post???

[bigskyjimmy]

Thanx Don for the info ,yea i did not get the link either but i will figure it out

[oldelmer1]

Don,

The link doesn't work for me either, could you copy and past the info into this post?

[Dontana]

https://mail-attachment.googleuserco...rkU2vo20pjRZRk Here's the link again. If it doesn't work, maybe search, email the company using the information above or try the photobucket pics. Good luck.