Hi Phil, Checkout CraigsList.com for the area you are in or will be in. Check under "Electronics" for installers for DirectTV or DishNetwork. They seem to have spare dishes and LNBFs they are looking to get rid of(maybe free). Just tell the installer what kind of Receiver you have and he will fix you up. I paid $50 for my dish. You'll need 50'-100' of RG-6 cable from the dish to your Monty. Camping World or Radio Shack have tripods for portable dishes. I use 3 - 1 Gal milk jugs to hold the tripod down in a breeze. Plug your cable into the back of your Receiver. (If you don't use the Sat/Cable input in your "convenience panel" you can carefully run the cable in through your open slide) You'll need a compass and a "satellite finder" for tuning in your dish.(also at CW & RS) It is a little tricky(if never done before) but with a little practice you'll lock in in no time. Just remember to have a clear shot to the south. Checkout RV Net:
http://www.rv.net/forum/index.cfm and go to Technology Corner for discussions on setting up a satellite dish etc.
Here are a couple of pictures of my dish MODs I did (stolen from "simonsrf" - Robbie Simons):
Highlighted the Elevation numbers & lines.
http://tinypic.com/view.php?pic=2hn9jdj&s=1
Highlighted the Skew numbers & lines.
http://tinypic.com/view.php?pic=4lz8xmp&s=1
I changed the nuts to knobs for easy adjustments.
http://tinypic.com/view.php?pic=4plsvva&s=1
If you have any other questions just ask.
Say hello to Cathy.