|
08-24-2014, 08:23 AM
|
#1
|
Montana Fan
Join Date: Aug 2008
Location: Glenrock
Posts: 155
M.O.C. #8761
|
Mor Ryde rubber pin box
Arrived in Dubois Thursday afternoon. While unhitching from the superglide I noticed a piece of rubber in the bed of the truck. Closer examination revealed the entire front rubber piece on my pin box had broken in three pieces. It looks like the rear piece will also fail in a matter of time. Has anyone had this happen, and is the repair a DIY?
Thanks
|
|
|
08-24-2014, 05:49 PM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Call MorRyde. They're very responsive and easy to work with. I believe it's something you can replace yourself once you have the part.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-24-2014, 06:00 PM
|
#3
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Yes, it is not too much of a job. The rubber inserts are numbered, give them the weight of your 5th wheel. I changed mine out. Have a slide show if it somewhere...
|
|
|
08-24-2014, 06:33 PM
|
#4
|
Montana Master
Join Date: Oct 2012
Location: Puyallup
Posts: 512
M.O.C. #12948
|
Wow , another thing to keep an eye on. Hopefully not common.
__________________
2018 3820FK Legacy Package
2013 3750fl
2019 Chevrolet 3500HD High Country Dually
|
|
|
08-25-2014, 07:47 AM
|
#5
|
Montana Master
Join Date: Jan 2013
Location: Depends on temps
Posts: 1,648
M.O.C. #13157
|
Are you talking about the small square bumper pieces or the rubber sheer spring?
If it is the sheer spring, I would not try and pull it till it is replaced. The sheer spring will have a number molded into the side of it. Like a "3" or "4" or "5" or "6". The higher the number the heavier weight of the trailer.
My '14 3150RL came with a "5". I removed it and installed a "4" at time of delivery.
To remove the rubber sheer spring, remove the 4 bolts in the end of the 2 round pieces that run front to back. Remove the 4 rubber plugs from the top part of the pin assy. When you remove the 4 nuts available under the rubber plugs the pin assy will drop straight down.
NOTE...It is heavy, you WILL need someone to help hold it so it does not fall on the ground. Once the pin assy is removed the rubber sheer spring can be removed.
Jim
__________________
2012 Ram Laramie 3500 DRW 4x4 3.73 Tow Max Pkg B&W Companion 60 gal RDS aux fuel tank. 2014 Montana 3150RL, 2 A/C's, Leather, 6 Point Jacks, Splendede WD2100XC, Mor/ryde X-Factor, Duravis 250 tires with TST 507RV monitors. 2 x Honda EU2000's
|
|
|
08-25-2014, 08:02 AM
|
#6
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
We had MorRyde on our 2005 and 2010 and despite heavy travel schedules never had an issue.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
08-25-2014, 09:47 AM
|
#7
|
Montana Fan
Join Date: Jun 2007
Location: Casper
Posts: 113
M.O.C. #7272
|
Had the same thing happen to us earlier this summer and had to replace both the front and rear Rubber Bump Stops.
Call Mor/ryde at 574-293-1581, part number RPB717-001.
Simple to install but you have to drop the bottom plate to install the back bumper.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|