BACK UP LIGHT on Montana
I installed a 3.5in. round light that swiveled verticaly onto my left rear jack mount.
I removed the bolt holding the pivot arm at the top rear corner and installed the
bolt thru the mount of the light.
Once the bolt was reinstalled I ran a HOT wire from my tail light down thru to the opening by the jack.
I then drilled a hole in the outside under pannel close to the jack area.I connected the wires as appropriate to a simple togle switch and installed the switch thru the hole.
Once this was completed I attached the ground wire to the frame. Now when I back into a dark campsite I can simply turn on the switch and there is plenty of light behind the unit.
EAGLEONE AND THE BUTTERFLY 2001 F350 4X4 SUPERDUTY CREWCAB AND 2004 MONTANA 3295RK ( A HAPPILY MARRIED COUPLE ENJOYING LIFE TOGETHER )!
|